Prep for a call: printable one-page brief · For your board packet: printable one-pager · Compare with another agency · Watch this feed: get an email before it expires
Feed status · checked 2026-07-09
The Comet
Based on the feed this agency publishes
down 0.4 since 2026-07-08
Ahead of 77% of all tracked agencies and 91% of large agencies. Operates in South Carolina.
A data-quality and completeness lens to help an agency improve its GTFS feed. Not an official compliance determination from any transit program. New to this? How to read your scorecard. Interactive view of this scorecard. Rubric v1.1, validator 8.0.1.
Checked for changes 10 hours ago; last changed 17 days ago.
Top things to fix
Set wheelchair_accessible on every trip (most small-agency fleets are 100% accessible, so this is often a single default).Likely your export tool
5558 of 5558 trips don't say whether the vehicle is wheelchair accessible. Even with accessible stops, riders need to know the bus itself can take them.
⏱ Often one default setting in your export.worth about +15 points
Agencies here usually clear this within about 1 week (based on 5 observed fixes).
Add fare_attributes.txt (or Fares v2 files) with your fare structure. If your service is fare-free, ask to have it marked fare-free instead.
The feed contains no fare information. Riders see 'fare unknown' in trip planners and can't budget their trip; visitors are most affected.
⏱ A small file for most flat-fare systems.worth about +15 points
Remove retired stops from the export, or add them back to the trips that should serve them.Likely your export tool
Some stops exist in the feed but no trip ever stops at them. Riders may walk to a stop where no bus is scheduled to arrive.
⏱ A review pass in your scheduling software.worth about +4 points
Agencies here usually clear this within about 1 week (based on 11 observed fixes).
Close the loop on each fix. Read the guide, make the change in your tool, and let the next run verify it — the scorecard shows the fix; the agency publishes it.
Set wheelchair_accessible on every trip (most small-agency fleets are 100% accessible, so this is often a single default). · Read the fix guide
Make the change. Make this change in whatever tool produces your feed, then re-export.
Prove it cleared. The next scorecard run re-checks this automatically and, once it is gone, mints a dated receipt. Self-check a feed before you publish.
Add fare_attributes.txt (or Fares v2 files) with your fare structure. If your service is fare-free, ask to have it marked fare-free instead. · Read the fix guide
Make the change. Make this change in whatever tool produces your feed, then re-export.
Prove it cleared. The next scorecard run re-checks this automatically and, once it is gone, mints a dated receipt. Self-check a feed before you publish.
Remove retired stops from the export, or add them back to the trips that should serve them. · Read the fix guide
Make the change. Make this change in whatever tool produces your feed, then re-export.
Prove it cleared. The next scorecard run re-checks this automatically and, once it is gone, mints a dated receipt. Self-check a feed before you publish.
Send your vendor a fix request
You may not control the GTFS export yourself. Copy this and send it to whoever runs your scheduling software export. It names each fix with the validator notice and a guide link.
Score by category
The MobilityData validator flagged 4 kinds of issue across 5 instances (0 error, 4 warning, 1 informational).
Service data covers the next 51 days.
100% of stops state wheelchair accessibility (10% marked accessible, 90% marked not accessible). This measures what the feed publishes, not whether a stop is physically usable. Fare data is not published.
100% of stops state accessibility (10% marked accessible). Reflects what the feed states, not verified physical usability.
Not scored yet. Nothing here counts against the grade.
Over time
Overall score across the last 21 checks — down 0.4 since 2026-07-08.
Show the numbers
| Check | Score | Change |
|---|---|---|
| 2026-06-19 | 81.9 | first check |
| 2026-06-20 | 81.9 | no change |
| 2026-06-21 | 81.9 | no change |
| 2026-06-22 | 81.9 | no change |
| 2026-06-23 | 81.9 | no change |
| 2026-06-24 | 81.9 | no change |
| 2026-06-25 | 81.9 | no change |
| 2026-06-26 | 81.9 | no change |
| 2026-06-27 | 81.9 | no change |
| 2026-06-28 | 81.9 | no change |
| 2026-06-29 | 81.9 | no change |
| 2026-06-30 | 81.9 | no change |
| 2026-07-01 | 81.5 | down 0.4 |
| 2026-07-02 | 81.1 | down 0.4 |
| 2026-07-03 | 80.7 | down 0.4 |
| 2026-07-04 | 80.2 | down 0.5 |
| 2026-07-05 | 79.8 | down 0.4 |
| 2026-07-06 | 79.4 | down 0.4 |
| 2026-07-07 | 79.0 | down 0.4 |
| 2026-07-08 | 78.6 | down 0.4 |
| 2026-07-09 | 78.2 | down 0.4 |
What changed since your last check
- Correctness no change
- Freshness down 1.7
- Rider experience no change
What changed in this feed
Overall score fell 0.4 points since 2026-07-08.
Same feed file as 2026-07-08; the published zip did not change.
Subscribe to this feed’s changes (Atom) to hear about grade drops in a reader, with no sign-up.
What changed over time
On 2026-06-19 this feed started at grade B. On 2026-07-05 the grade moved from B to C. As of 2026-07-09 it holds grade C.
A plain-language history of this feed, newest first.
- 2026-07-05 Grade went B to C.
Everything we checked
- Warning5558 instances
5558 of 5558 trips don't say whether the vehicle is wheelchair accessible.
Even with accessible stops, riders need to know the bus itself can take them.
Fix: Set wheelchair_accessible on every trip (most small-agency fleets are 100% accessible, so this is often a single default). (Often one default setting in your export.)
Agencies here usually clear this within about 1 week (based on 5 observed fixes).
Validator rule: scorecard_wheelchair_accessible_unknown · Read the fix guide · See GTFS Schedule reference (opens the GTFS Schedule reference on an external site)
- Warning1083 instances
1083 of 5558 trips have no headsign.
Riders at the stop can't tell which direction a bus is going.
Fix: Populate trip_headsign to match what the bus displays. (Usually a bulk edit in your scheduling software.)
Validator rule: scorecard_missing_headsigns · Read the fix guide · See GTFS Best Practices (opens GTFS Best Practices on an external site)
- Warning2 instances
Some stops exist in the feed but no trip ever stops at them.
Riders may walk to a stop where no bus is scheduled to arrive.
Fix: Remove retired stops from the export, or add them back to the trips that should serve them. (A review pass in your scheduling software.)
Agencies here usually clear this within about 1 week (based on 11 observed fixes).
Validator rule: stop_without_stop_time · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Warning1 instance
Some service calendars in the feed have already expired.
Expired calendars are dead weight and can hide real schedule problems from your staff and vendors.
Fix: Remove past service periods the next time you export the feed. (One setting in most export tools.)
Agencies here usually clear this within about 1 week (based on 61 observed fixes).
Validator rule: expired_calendar · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Warning1 instance
Missing feed contact email and url (flagged by the MobilityData validator).
See the linked rule for what this affects.
Fix: Review the rule documentation for 'missing_feed_contact_email_and_url' at https://gtfs-validator.mobilitydata.org/rules.html and check the flagged rows in your feed. (Varies.)
Agencies here usually clear this within about 1 week (based on 6 observed fixes).
Validator rule: missing_feed_contact_email_and_url · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Warning1 instance
The feed contains no fare information.
Riders see 'fare unknown' in trip planners and can't budget their trip; visitors are most affected.
Fix: Add fare_attributes.txt (or Fares v2 files) with your fare structure. If your service is fare-free, ask to have it marked fare-free instead. (A small file for most flat-fare systems.)
Validator rule: scorecard_no_fare_data · Read the fix guide · See GTFS Best Practices (opens GTFS Best Practices on an external site)
- Info1 instance
Big gap in service (flagged by the MobilityData validator).
See the linked rule for what this affects.
Fix: Review the rule documentation for 'big_gap_in_service' at https://gtfs-validator.mobilitydata.org/rules.html and check the flagged rows in your feed. (Varies.)
Agencies here usually clear this within about 1 week (based on 13 observed fixes).
Validator rule: big_gap_in_service · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Info1 instance
feed_info.txt has no technical contact (feed_contact_email or feed_contact_url).
App makers and state data programs have nobody to email when they spot a problem with your feed, so problems linger.
Fix: Add feed_contact_email to feed_info.txt. (One field.)
Agencies here usually clear this within about 1 week (based on 10 observed fixes).
Validator rule: scorecard_no_feed_contact · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
Beyond the grade
Opportunities that do not change your grade today: fare detail, on-demand service, and deeper accessibility data.
9 route badge(s) pair a color and text color below the WCAG 4.5:1 contrast bar (101, 91, 20, 88, 2, and more).
Consider: Adjust route_color or route_text_color so each pair clears 4.5:1. Often switching the text between black and white is enough.
204 stop name(s) use abbreviations or symbols a screen reader may mispronounce, with no spoken form set ("Harden Greene South (Fountain @ Five Points)", "Gervais St and Laurens West", "Gervais St and Sumter West", and more).
Consider: Add tts_stop_name with the spoken form, e.g. 'Main Street and Second Avenue', for the affected stops.
NTD certification readiness Ready
Published at a public URL, valid, and current: the three things the NTD GTFS requirement asks of a feed all hold here. Only your own D-10 certification makes that official; this is a heads-up, not a determination.
- Published Ready
- Published at a public URL.
- Valid Ready
- Passes validation with no errors.
- Current Ready
- Service data covers the next 51 days.
- agency_id matches your NTD ID Not checked yet
- Setting your GTFS agency_id to your five-digit NTD ID is an optional way to line a feed up with its National Transit Database record. FTA links the two on your P-50 form, so it is not a required feed change. We don't have your NTD ID on file, so this is not checked yet.
In plain words: if you report to the federal transit database, you have to publish a working, up-to-date feed and confirm it once a year. This box is a heads-up on whether yours looks ready; it is not the official sign-off.
A readiness signal mapping this feed to the FTA National Transit Database GTFS requirement (Report Year 2023 onward: a public, valid, current feed, certified annually on the D-10). Aligning agency_id with your NTD ID lets the feed line up with your NTD record; the July 2025 final rule links the two on the P-50 form rather than requiring that feed change, and requires shapes.txt in the published GTFS: Full Reporters from Report Year 2025, and Reduced, Rural, and Tribal Reporters from Report Year 2026. Not an official determination; your certification is the official check.
Conformance mark Not yet
This feed is close to the conformance mark. States wheelchair access on 100% of stops and 0% of trips; the mark needs 90% of each.
- Valid Met
- Passes validation with no errors.
- Current Met
- Service data covers the next 51 days.
- Accessible Not yet
- States wheelchair access on 100% of stops and 0% of trips; the mark needs 90% of each.
In plain words: earn this mark when your feed passes validation, has not expired, and says whether nearly every stop and trip is wheelchair accessible.
A pass credential for a feed that is valid, current, and states wheelchair access on nearly every stop and trip. Accessibility here measures what the feed publishes, not whether a stop is physically usable. How the conformance mark works.
Can riders use it?
Checks beyond structural validation: places where the feed is valid but a rider still could not travel.
- 2 of 1302 boardable stops are never served by any trip. Riders see these stops in apps and on the map but can never catch anything there, which erodes trust in the data. Remove stops no route serves, or add the trips that should call at them.
These do not change the grade. They catch trips with no rideable leg and stops no trip serves, the kind of gap a trip planner trips over.
Clears the Google and Apple Maps four-week coverage bar. This feed has 51 days of service ahead, clearing the four-week (28-day) window Maps asks for. No validator errors either, so riders keep seeing this agency in their trip planners; warnings lower the grade here but do not remove a feed from Maps.
How this agency maps to the standards
A data-quality lens, not a compliance determination. Each category shows this feed's score and the standards it relates to: the FTA National Transit Database GTFS requirement, the MobilityData grading scheme, and the Google Transit gate. Read the full standards crosswalk.
- Correctness 88 / 100
- GTFS Schedule best practices, checked by the MobilityData validator. MobilityData grading: stop locations, route names and colors. Google Transit: a feed must pass validation to stay in Maps.
- Freshness 85 / 100
- The FTA National Transit Database expectation of a valid, current feed. Google Transit: an expired calendar drops the agency from Maps.
- Rider experience 60 / 100
- GTFS Best Practices for rider-facing fields. MobilityData grading: stop names and headsigns.
- Realtime quality Not yet published
- GTFS-Realtime best practices: a stable URL, high uptime, and frequent updates.
Cite this record
This page updates on every check. The record below does not: it is the dated file this grade came from, published at https://gtfsscorecard.org/data/artifacts/the-comet-2209/2026-07-09.json and never overwritten, pinning the grade, category scores, rubric version, validator version, and the scored feed's sha256 as they stood on 2026-07-09. Use it in a board packet, an NTD narrative, or a research citation instead of linking the live page, whose content will differ on your next visit.
Citing the tool itself rather than one agency's record? Use the repo's CITATION.cff.