Feed status · checked 2026-08-01
Cecil Transit
Based on the feed this agency publishes
Service mode Bus
unchanged since 2026-07-31
Catalogued in Maryland.
A data-quality and completeness lens to help an agency improve its GTFS feed. Not an official compliance determination from any transit program. New to this? How to read your scorecard. Interactive view of this scorecard. Rubric v1.3, validator 8.0.1.
Checked for changes 80 minutes ago; last changed 41 days ago.
Measured 3 of 4 score categories from the agency's own feed.
How we measured this
Confidence in this measurement: medium.
- Realtime quality was not measured this run. It does not count against the grade.
- The feed was downloaded from the agency's own URL.
Confidence describes how much the pipeline could measure this run, not the feed itself. It never changes the grade.
Top things to fix
Re-export the feed with a calendar that reaches further out, and set feed_info feed_end_date past your next service change.Likely your export tool
Service data ended 1801 day(s) ago. When the calendar runs out, trip planners stop showing this agency even though the buses are still running. Riders are told the service does not exist.
⏱ Usually one export setting; export on a schedule so it never lapses again.worth about +100 points in its category
Review the rule documentation for 'stop_time_timepoint_without_times' at https://gtfs-validator.mobilitydata.org/rules.html and check the flagged rows in your feed.
Stop time timepoint without times (flagged by the MobilityData validator). See the linked rule for what this affects.
⏱ Varies.worth about +18 points in its category
Set wheelchair_boarding to 1 (accessible) or 2 (not accessible) for every stop. A field survey can start with the busiest stops.Likely your team
70 of 75 stops don't say whether a wheelchair user can board there. Riders who use wheelchairs can't plan a trip when accessibility is marked 'unknown'; apps show no information at all.
⏱ A column in stops.txt; your scheduling software likely has it.worth about +23 points in its category
This feed is published from a code repository, so whoever maintains that repository regenerates the zip — often planning staff or a consultant. The fix happens in the source data, then a fresh export is committed.
Finding handoff
Move one finding to a recheck
Select one finding. Copy the request, make the change in the feed-producing tool, then compare the next complete run.
- Feed evidence
- Service data ended 1801 day(s) ago.
- Next action
- Re-export the feed with a calendar that reaches further out, and set feed_info feed_end_date past your next service change.
- Recheck
- Publish the changed feed at the same URL. On the next complete, comparable scorecard run, confirm that this finding is no longer reported.
Copy handoff text
- Feed evidence
- Stop time timepoint without times (flagged by the MobilityData validator).
- Next action
- Review the rule documentation for 'stop_time_timepoint_without_times' at https://gtfs-validator.mobilitydata.org/rules.html and check the flagged rows in your feed.
- Recheck
- Publish the changed feed at the same URL. On the next complete, comparable scorecard run, confirm that this finding is no longer reported.
Copy handoff text
- Feed evidence
- 70 of 75 stops don't say whether a wheelchair user can board there.
- Next action
- Set wheelchair_boarding to 1 (accessible) or 2 (not accessible) for every stop. A field survey can start with the busiest stops.
- Recheck
- Publish the changed feed at the same URL. On the next complete, comparable scorecard run, confirm that this finding is no longer reported.
Copy handoff text
How to make and check these changes
Check the result on the published feed. Read the guide, make the change in your tool, and use the next comparable run to see whether the finding is still reported. Only an action or ticket record can attribute who made the change.
Re-export the feed with a calendar that reaches further out, and set feed_info feed_end_date past your next service change. · Read the fix guide
Make the change. This feed is published from a code repository, so whoever maintains that repository regenerates the zip — often planning staff or a consultant. The fix happens in the source data, then a fresh export is committed.
Check the result. The next scorecard run checks this finding again. If a comparable check no longer reports it, the feed's clearance log records that result. This confirms feed state, not who made the change. Self-check a feed before you publish.
Review the rule documentation for 'stop_time_timepoint_without_times' at https://gtfs-validator.mobilitydata.org/rules.html and check the flagged rows in your feed.
Make the change. This feed is published from a code repository, so whoever maintains that repository regenerates the zip — often planning staff or a consultant. The fix happens in the source data, then a fresh export is committed.
Check the result. The next scorecard run checks this finding again. If a comparable check no longer reports it, the feed's clearance log records that result. This confirms feed state, not who made the change. Self-check a feed before you publish.
Set wheelchair_boarding to 1 (accessible) or 2 (not accessible) for every stop. A field survey can start with the busiest stops. · Read the fix guide
Make the change. This feed is published from a code repository, so whoever maintains that repository regenerates the zip — often planning staff or a consultant. The fix happens in the source data, then a fresh export is committed.
Check the result. The next scorecard run checks this finding again. If a comparable check no longer reports it, the feed's clearance log records that result. This confirms feed state, not who made the change. Self-check a feed before you publish.
Rider view: what this feed publishes
A quick read of rider-facing information in this feed.
- Schedule visibility
- The feed's last published service date was 1801 days ago.
- Published accessibility data
- Accessibility information is stated for 6.7% of stops and 11.4% of trips. This measures published data, not whether stops or vehicles are physically usable.
- Fare information
- No fare information is published in the feed.
- Realtime information
- Realtime-feed availability and live-arrival coverage are not known from this scorecard.
Important: This does not rate service reliability. Riders should confirm current service alerts, fares, and accessibility accommodations with the transit operator before traveling.
Send your vendor a fix request
This feed is published from a code repository. Forward this to whoever maintains that repository; the fix happens in the source data, then a fresh export is committed. Each fix names the validator notice and a guide link.
Send the agency a note
Supporting this agency? Copy this and email it to them. It names what lapsed, why it matters to riders, and the one setting to change.
Score by category
The MobilityData validator flagged 13 kinds of issue across 1251 instances (10 error, 1238 warning, 3 informational).
Service data ended 1801 day(s) ago. Trip planners have likely already dropped this feed.
7% of stops state wheelchair accessibility (7% marked accessible, 0% marked not accessible). This measures what the feed publishes, not whether a stop is physically usable. Fare data is not published.
7% of stops state accessibility (7% marked accessible). Reflects what the feed states, not verified physical usability.
2 accessibility depth signals
2 route badge(s) pair a color and text color below the WCAG 4.5:1 contrast bar (Route 3, Route 5).
Consider: Adjust route_color or route_text_color so each pair clears 4.5:1. Often switching the text between black and white is enough.
34 stop name(s) use abbreviations or symbols a screen reader may mispronounce, with no spoken form set ("200 Chesapeake Blvd", "150 E. Main St.", "Newark Park & Ride", and more).
Consider: Add tts_stop_name with the spoken form, e.g. 'Main Street and Second Avenue', for the affected stops.
Opportunities to strengthen the data, not deductions from the sub-score above. States what the second accessibility lens can check from the feed, not verified physical usability.
Not scored yet. Nothing here counts against the grade.
Routes and stops
Each route is drawn once, using the longest shape its trips follow; stops are the dots.
This feed has 75 stops.
The route and stop data is ready below. Load the map only when you want the geographic view. It uses additional data.
Basemap: OpenFreeMap, © OpenStreetMap contributors. Routes and stops: this agency's GTFS feed.
- Route 1 (brown)
- Route 2 (green)
- Route 4 (purple)
- Route 5 (teal)
| Route | Type | Line color |
|---|---|---|
| Route 1 Glasgow Connection | Bus | brown |
| Route 2 Perryville Connection | Bus | green |
| Route 3 Mid -County Connection | Bus | teal (no shape in feed) |
| Route 4 Elkton-Newark Connection | Bus | purple |
| Route 5 Commuter Connection | Bus | teal |
List every stop
- 150 E. Main St.
- Peoples Plaza - DART interconnection
- 214 North St.
- RT 40 - Ruby Tuesday
- NE - Walgreens / Food Lion
- NE Walmart
- Cecil College - Main Campus
- Industrial Park (Delaware)
- RT 40 - Food Lion
- Shop Rite
- Newark Transit Hub
- Newark Train Station
- Newark Park & Ride
- Newark Main St.
- Rt 279 & Amstel Ave
- Green Turtle (205 S Main St) at Rt 279
- Interchange Business Park
- Suburban Plaza
- Rt 279 & Fletchwood Rd (Wawa)
- Kmart - Big Elk Mall
- Rt 279 - Flying J & McDonalds
- Cecil County Library - Elkton Branch
- Super Wal-Mart
- ALPHA Health (Whitehall Rd. entrance)
- Acme - Big Elk Mall
- 200 Chesapeake Blvd
- RT 40 - Barrington Woods (Drop off only)
- RT 40 - Kohls
- RT 40 - John Deere
- RT 40 - Happy Harry's
- Melbourne Blvd. / Big Lots
- High & South Sts.
- RT 40 - Happy 40 Liquors
- Bridge St. Plaza - American Cash Traders
- Family Education Center
- RT 213 - Royal Farms
- Skipjack Court (2)
- Union Hospital
- Skipjack Court (3)
- Elkton Senior Apts.
- Abbey Manor / Elkton Rehabilitation
- Skipjack Court (1)
- RT 40 - North Bay Medical Ctr.
- Safeway - Food Court Entrance
- RT 40 - La Grange
- RT 40 - Chili's
- RT 40 - Across from Happy 40
- RT 40 - Normira Ave
- RT 40 - New Eastern Motel
- Coudon Blvd. - Across from Perryville Library
- Springford Gardens / Thyme St.
- Perryville MARC Station
- Concord Apts. - Aiken Ave.
- Perry Pt. Bldg. 361
- Hollingsworth Manor Rd. 1
- Cecil College - Elkton Station
- RT 40 - Hale Trailer Co.
- Redner's - Whitehall Rd. (Call in stop)
- RT 40 - PVL Food Lion
- Lindy's Market - Aiken Ave.
- Methodist Church - Broad St.
- NE - Crouch Ln. & Mauldin Ave.
- NE - Mauldin Ave. and Jethro St.
- NE - Howards Market
- Foxridge Manor Apts.
- RT 40 - Dominos Pizza
- Medical Bldg. (UH parking garage)
- Chesapeake Blvd. after MVA
- DE Express - Elkton Blvd.
- Cottages at Chesapeake - Bridgewell Pkwy
- RT 40 - Principio Health Center (WB)
- Perryville Post Office - Broad St.
- Landing Ln. & W. Main St.
- RT 40 - Maloney Rd.
- Broad St. - Across from Boxcar Ave.
Over time
Overall score across the last 4 checks — unchanged since 2026-07-31.
Show the numbers
| Check | Score | Change |
|---|---|---|
| 2026-07-25 | 26.8 | first check |
| 2026-07-30 | 26.8 | no change |
| 2026-07-31 | 26.8 | no change |
| 2026-08-01 | 26.8 | no change |
What changed since your last check
- Correctness no change
- Freshness no change
- Rider experience no change
What changed in this feed
Overall grade and score held steady since 2026-07-31.
Same feed file as 2026-07-31; the published zip did not change.
Subscribe to this feed’s changes (Atom) to hear about grade drops in a reader, with no sign-up.
Everything we checked
19 findings, ordered by severity.
Show every finding
- Error10 instances
Stop time timepoint without times (flagged by the MobilityData validator).
See the linked rule for what this affects.
Fix: Review the rule documentation for 'stop_time_timepoint_without_times' at https://gtfs-validator.mobilitydata.org/rules.html and check the flagged rows in your feed. (Varies.)
Finding code: stop_time_timepoint_without_times · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Error1 instance
Service data ended 1801 day(s) ago.
When the calendar runs out, trip planners stop showing this agency even though the buses are still running. Riders are told the service does not exist.
Fix: Re-export the feed with a calendar that reaches further out, and set feed_info feed_end_date past your next service change. (Usually one export setting; export on a schedule so it never lapses again.)
Finding code: scorecard_feed_expired · Read the fix guide · See GTFS Best Practices (opens GTFS Best Practices on an external site)
- Warning1184 instances
Some values have extra spaces at the start or end.
A stray space can break a match, so a stop or route may fail to link across files.
Fix: Trim leading and trailing spaces on export. The scorecard's auto-fixed copy already does this. (Usually one export setting.)
Finding code: leading_or_trailing_whitespaces · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Warning70 instances
70 of 75 stops don't say whether a wheelchair user can board there.
Riders who use wheelchairs can't plan a trip when accessibility is marked 'unknown'; apps show no information at all.
Fix: Set wheelchair_boarding to 1 (accessible) or 2 (not accessible) for every stop. A field survey can start with the busiest stops. (A column in stops.txt; your scheduling software likely has it.)
Finding code: scorecard_wheelchair_boarding_unknown · Read the fix guide · See GTFS Schedule reference (opens the GTFS Schedule reference on an external site)
- Warning35 instances
Some rider-facing names are in ALL CAPS or all lowercase.
ALL-CAPS stop and headsign names are harder to read in apps and are read awkwardly by screen readers.
Fix: Use mixed case for stop names and headsigns (e.g. 'Main St & 2nd Ave', not 'MAIN ST & 2ND AVE'). (Often a bulk fix in your scheduling software.)
Finding code: mixed_case_recommended_field · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Warning31 instances
31 of 35 trips don't say whether the vehicle is wheelchair accessible.
Even with accessible stops, riders need to know the bus itself can take them.
Fix: Set wheelchair_accessible on every trip. If every vehicle is accessible, this may be one default; otherwise use the value for each trip. (A default or per-trip field in your export.)
Finding code: scorecard_wheelchair_accessible_unknown · Read the fix guide · See GTFS Schedule reference (opens the GTFS Schedule reference on an external site)
- Warning6 instances
Some files leave out fields that GTFS asks for but does not require.
Recommended fields like agency_phone or stop descriptions make the feed more useful to riders and trip planners.
Fix: Review the flagged fields and fill in the ones your riders would use. (A field at a time; not urgent.)
Finding code: missing_recommended_field · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Warning3 instances
Stop has too many matches for shape (flagged by the MobilityData validator).
See the linked rule for what this affects.
Fix: Review the rule documentation for 'stop_has_too_many_matches_for_shape' at https://gtfs-validator.mobilitydata.org/rules.html and check the flagged rows in your feed. (Varies.)
Finding code: stop_has_too_many_matches_for_shape · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Warning3 instances
The feed contains route shapes no trip uses.
Harmless to riders, but it bloats the feed and suggests stale export data.
Fix: Turn on 'remove unused shapes' (or the like) in your export tool. (One setting.)
Finding code: unused_shape · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Warning3 instances
3 of 35 trips lack rider-facing destination or direction text.
When a route has multiple directions or patterns, the route name alone may not tell riders which service is coming.
Fix: Add the destination, direction, or 'via' label riders actually see to trip_headsign. Do not copy the route name. If the label changes during the trip, use stop_headsign. (Usually one value per route pattern in your scheduling source.)
Finding code: scorecard_missing_headsigns · Read the fix guide · See GTFS Best Practices (opens GTFS Best Practices on an external site)
- Warning2 instances
Some service calendars in the feed have already ended.
Expired calendars are dead weight and can hide real schedule problems from your staff and vendors.
Fix: Remove past service periods the next time you export the feed. (One setting in most export tools.)
Finding code: expired_calendar · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Warning2 instances
On some trips the stops fall along the route line in a different order than the schedule lists.
Trip planners can draw the bus doubling back or skipping ahead, which confuses riders reading the map.
Fix: Check the stop order and the shape direction in your scheduling software; the shape is often drawn backwards. (A few minutes per flagged trip.)
Finding code: stops_match_shape_out_of_order · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Warning1 instance
This feed's service calendar runs out within the next 7 days.
When the calendar ends, Google Maps and other trip planners drop your agency entirely. Riders see no service at all.
Fix: Export and publish an updated GTFS feed that covers at least the next 30 days of service. (Usually a re-export from your scheduling software.)
Finding code: feed_expiration_date7_days · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Warning1 instance
feed_info.txt lists no contact email and no contact URL.
Without a contact, apps like Google Maps can't reach you when they find a problem in the feed.
Fix: Add feed_contact_email or feed_contact_url to feed_info.txt. (One field, set once in export settings.)
Finding code: missing_feed_contact_email_and_url · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Warning1 instance
Many of the feed's trips don't run at all in the next 7 days.
It usually means old service periods are still in the export, making the feed bigger and harder to check.
Fix: Trim past service periods the next time you export. (One setting in most export tools.)
Finding code: trip_coverage_not_active_for_next7_days · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Warning1 instance
The feed contains no fare information.
Riders see 'fare unknown' in trip planners and can't budget their trip; visitors are most affected.
Fix: Add fare_attributes.txt (or Fares v2 files) with your fare structure. If your service is fare-free, ask to have it marked fare-free instead. (A small file for most flat-fare systems.)
Finding code: scorecard_no_fare_data · Read the fix guide · See GTFS Best Practices (opens GTFS Best Practices on an external site)
- Info2 instances
Some service dates fall outside the date window set in feed_info.txt.
feed_info.txt should span every day your service runs, so apps know when the data applies.
Fix: Widen feed_start_date and feed_end_date to cover all service dates, or fix the dates that fall outside. (Two fields in feed_info.txt, or one export setting.)
Finding code: service_window_outside_feed_period · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Info1 instance
Some files contain columns that are not part of the GTFS spec.
Harmless to riders, but apps ignore these columns and they can hide typos in real column names.
Fix: Check the flagged column names for misspellings of standard GTFS fields; remove them if they are vendor extras. (A quick look at the flagged files.)
Finding code: unknown_column · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Info1 instance
feed_info.txt has no technical contact (feed_contact_email or feed_contact_url).
Trip-planning apps and regional data coordinators have nobody to email when they spot a problem with your feed, so problems linger.
Fix: Add feed_contact_email to feed_info.txt. (One field.)
Finding code: scorecard_no_feed_contact · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
NTD GTFS readiness Not ready
Resolve this before you certify on the D-10. 1 validator error to resolve. Service data expired 1801 days ago, so FTA would find the link out of date. agency.txt has no nonblank agency_id. Every RY2026 NTD GTFS submission needs a stable value unique among the reporters represented in the feed, crosswalked to each reporter's NTD ID on the P-50 form.
- Published Ready
- Published at a public URL.
- Valid Needs attention
- 1 validator error to resolve.
- Current Not ready
- Service data expired 1801 days ago, so FTA would find the link out of date.
- agency_id provided Not ready
- agency.txt has no nonblank agency_id. Every RY2026 NTD GTFS submission needs a stable value unique among the reporters represented in the feed, crosswalked to each reporter's NTD ID on the P-50 form.
- shapes.txt covers your trips Ready
- All 35 trips have a shape in shapes.txt.
In plain words: if you report to the federal transit database, you have to publish a working, up-to-date feed, provide a stable agency_id for each represented reporter, and confirm the feed and P-50 crosswalk each year. This box is a heads-up; your filings are the official check.
A readiness signal mapping this feed to the FTA National Transit Database GTFS requirement (Report Year 2023 onward: a public, valid, current feed, certified annually on the D-10). For RY2026, each represented reporter needs a stable agency_id, unique within the feed and crosswalked to its five-digit NTD ID on P-50; the values do not need to be equal. FTA also requires shapes.txt in the published GTFS: Full Reporters from Report Year 2025, and Reduced, Rural, and Tribal Reporters from Report Year 2026. Not an official determination; your certification is the official check.
Conformance mark Not yet
This feed is close to the conformance mark. 1 validator error to resolve. Service data expired 1801 days ago. States wheelchair access on 7% of stops and 11% of trips; the mark needs 90% of each.
- Valid Not yet
- 1 validator error to resolve.
- Current Not yet
- Service data expired 1801 days ago.
- Accessible Not yet
- States wheelchair access on 7% of stops and 11% of trips; the mark needs 90% of each.
In plain words: earn this mark when your feed passes validation, has not expired, and says whether nearly every stop and trip is wheelchair accessible.
A pass credential for a feed that is valid, current, and states wheelchair access on nearly every stop and trip. Accessibility here measures what the feed publishes, not whether a stop is physically usable. How the conformance mark works.
Below the Google and Apple Maps four-week coverage bar. This feed's last day of service has passed, so Google and Apple Maps will stop showing your agency. Re-export with a calendar that covers at least the next four weeks. The feed also carries 10 validator errors, the other thing Maps checks at onboarding; the findings below name each fix.
How this agency maps to the standards
The scorecard is a data-quality lens, not a compliance determination. Its universal references describe good GTFS and useful rider information. Useful references here are GTFS Schedule Best Practices, GTFS-Realtime Best Practices, MobilityData grading scheme, Google Transit publication guidance, FTA National Transit Database GTFS requirement. Read the full standards crosswalk.
- Correctness 33 / 100
- GTFS Schedule best practices, checked by the MobilityData validator. MobilityData grading covers stop locations, route names, and colors. Google Transit requires a feed to pass validation for publication. FTA NTD readiness also checks that the published feed is valid.
- Freshness 0 / 100
- GTFS Schedule best practices call for a dataset that stays current. An expired calendar can remove service from Google Transit and other rider trip planners. FTA NTD readiness also checks that the published feed is current.
- Rider experience 40 / 100
- GTFS Best Practices for rider-facing fields. MobilityData grading covers stop names and headsigns.
- Realtime quality Not yet published
- GTFS-Realtime best practices: a stable URL, high uptime, and frequent updates.
Show your grade
Put a badge on your agency site or feed README. It updates after each completed scoring check and links back to this scorecard.
Prefer a shields.io style? Point a dynamic endpoint badge at the published badge.json.
Cite this record
This page updates on every check. The record below does not: it is the dated file this grade came from, published at https://gtfsscorecard.org/data/artifacts/cecil-transit/2026-08-01.json and never overwritten, pinning the grade, category scores, rubric version, validator version, reader archive profile, and the scored feed's sha256 as they stood on 2026-08-01. Use it in a board packet, a regulatory filing, or a research citation instead of linking the live page, whose content will differ on your next visit.
Citing the tool itself rather than one agency's record? Use the repo's CITATION.cff.