STAS (Saint-Étienne Métropole)

Trip distance exceeds shape distance (flagged by the MobilityData validator).

See the linked rule for what this affects.

Fix: Review the rule documentation for 'trip_distance_exceeds_shape_distance' at https://gtfs-validator.mobilitydata.org/rules.html and check the flagged rows in your feed. (Varies.)

Finding code: trip_distance_exceeds_shape_distance · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Some trips have stop times whose distances along the route go backwards.

Apps can show transit vehicles jumping backwards or mis-order stops.

Fix: Re-generate shape distances in your export; flag to your vendor if it persists. (Usually an export-tool fix, not hand editing.)

Finding code: decreasing_or_equal_stop_time_distance · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

10300 of 10300 trips don't say whether the vehicle is wheelchair accessible.

Even with accessible stops, riders need to know the transit vehicle itself can take them.

Fix: Set wheelchair_accessible on every trip. If every vehicle is accessible, this may be one default; otherwise use the value for each trip. (A default or per-trip field in your export.)

Finding code: scorecard_wheelchair_accessible_unknown · Read the fix guide · See GTFS Schedule reference (opens the GTFS Schedule reference on an external site)

Some rider-facing names are in ALL CAPS or all lowercase.

ALL-CAPS stop and headsign names are harder to read in apps and are read awkwardly by screen readers.

Fix: Use mixed case for stop names and headsigns (e.g. 'Main St & 2nd Ave', not 'MAIN ST & 2ND AVE'). (Often a bulk fix in your scheduling software.)

Finding code: mixed_case_recommended_field · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

On some trips the stop distances run a little past the end of the route line.

The stop and shape distance values don't quite line up, so any math that uses them can drift.

Fix: Re-generate shape_dist_traveled on export so stop and shape distances use the same units. (Usually an export-tool fix, not hand editing.)

Finding code: trip_distance_exceeds_shape_distance_below_threshold · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

972 of 2268 stops don't say whether a wheelchair user can board there.

Riders who use wheelchairs can't plan a trip when accessibility is marked 'unknown'; apps show no information at all.

Fix: Set wheelchair_boarding to 1 (accessible) or 2 (not accessible) for every stop. A field survey can start with the busiest stops. (A column in stops.txt; your scheduling software likely has it.)

Finding code: scorecard_wheelchair_boarding_unknown · Read the fix guide · See GTFS Schedule reference (opens the GTFS Schedule reference on an external site)

Some stops sit far from the route line, going by the feed's own distance values.

Trip planners may draw the route down the wrong path or point riders to the wrong boarding location.

Fix: Check the flagged stops' shape_dist_traveled against the route shape, and re-generate it on export if they disagree. (Usually an export-tool fix, not hand editing.)

Finding code: stop_too_far_from_shape_using_user_distance · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

The feed contains route shapes no trip uses.

Harmless to riders, but it bloats the feed and suggests stale export data.

Fix: Turn on 'remove unused shapes' (or the like) in your export tool. (One setting.)

Finding code: unused_shape · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Equal shape distance diff coordinates distance below threshold (flagged by the MobilityData validator).

See the linked rule for what this affects.

Fix: Review the rule documentation for 'equal_shape_distance_diff_coordinates_distance_below_threshold' at https://gtfs-validator.mobilitydata.org/rules.html and check the flagged rows in your feed. (Varies.)

Finding code: equal_shape_distance_diff_coordinates_distance_below_threshold · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Some stops sit far from the route line they belong to.

Trip planners may draw the transit vehicle route through the wrong path or point riders to the wrong boarding location.

Fix: Check the flagged stops' coordinates and the route shape in your scheduling software; re-snap whichever is misplaced. (A few minutes per flagged stop.)

Finding code: stop_too_far_from_shape · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Some stops exist in the feed but no trip ever stops at them.

Riders may walk to a stop where no transit vehicle is scheduled to arrive.

Fix: Remove retired stops from the export, or add them back to the trips that should serve them. (A review pass in your scheduling software.)

Finding code: stop_without_stop_time · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

A file GTFS asks for (usually feed_info.txt) is missing.

feed_info.txt tells apps who publishes the feed and when it expires; without it nobody is warned before data goes stale.

Fix: Add feed_info.txt with publisher name, URL, language, and feed_start_date/feed_end_date. (One small file, set once in export settings.)

Finding code: missing_recommended_file · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

feed_info.txt is missing its start/end dates (the file itself is absent)

Apps and this scorecard can't warn anyone before the feed goes stale without stated validity dates.

Fix: Add feed_info.txt with feed_start_date and feed_end_date to your export. (Two fields, set once in export settings.)

Finding code: scorecard_missing_feed_info_dates · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

The feed contains no fare information.

Riders see 'fare unknown' in trip planners and can't budget their trip; visitors are most affected.

Fix: Add fare_attributes.txt (or Fares v2 files) with your fare structure. If your service is fare-free, ask to have it marked fare-free instead. (A small file for most flat-fare systems.)

Finding code: scorecard_no_fare_data · Read the fix guide · See GTFS Best Practices (opens GTFS Best Practices on an external site)

About 2247 stop names are written in ALL CAPS.

Mixed-case names are easier to read in apps and are read more naturally by screen readers.

Fix: Rename stops to mixed case where the language has letter case (for example, 'Central Station'). (Often a bulk fix in your scheduling software.)

Finding code: scorecard_stop_names_all_caps · Read the fix guide · See GTFS Best Practices (opens GTFS Best Practices on an external site)

Some trip headsigns name a stop along the way, not the final destination.

The sign should tell riders where the transit vehicle ends up, so a midpoint name can send them the wrong way.

Fix: Set trip_headsign to the trip's last stop or its overall destination. (Usually a bulk edit in your scheduling software.)

Finding code: trip_headsign_matches_intermediate_stop · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

feed_info.txt has no technical contact (feed_contact_email or feed_contact_url).

App makers and state data programs have nobody to email when they spot a problem. Small errors then sit in the feed for months.

Fix: Add feed_contact_email to feed_info.txt. (One field.)

Finding code: scorecard_no_feed_contact · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)