Feed status · checked 2026-08-01
Lakes Region Explorer
Based on the feed this agency publishes
Service mode Bus
Methodology changed; trend restarts here
Catalogued in Maine.
A data-quality and completeness lens to help an agency improve its GTFS feed. Not an official compliance determination from any transit program. New to this? How to read your scorecard. Interactive view of this scorecard. Rubric v1.3, validator 8.0.1.
Checked for changes 9 hours ago; last fetch returned HTTP 301.
Measured 3 of 4 score categories from the Mobility Database's mirror copy of the feed.
How we measured this
Confidence in this measurement: provisional.
- Realtime quality was not measured this run. It does not count against the grade.
- The agency's own feed URL was unreachable, so the Mobility Database's hosted mirror copy was scored instead.
Confidence describes how much the pipeline could measure this run, not the feed itself. It never changes the grade.
Top things to fix
Set wheelchair_boarding to 1 (accessible) or 2 (not accessible) for every stop. A field survey can start with the busiest stops.Likely your team
21 of 21 stops don't say whether a wheelchair user can board there. Riders who use wheelchairs can't plan a trip when accessibility is marked 'unknown'; apps show no information at all.
⏱ A column in stops.txt; your scheduling software likely has it.worth about +25 points in its category
Set wheelchair_accessible on every trip. If every vehicle is accessible, this may be one default; otherwise use the value for each trip.Likely your export tool
15 of 15 trips don't say whether the vehicle is wheelchair accessible. Even with accessible stops, riders need to know the bus itself can take them.
⏱ A default or per-trip field in your export.worth about +15 points in its category
Add the destination, direction, or 'via' label riders actually see to trip_headsign. Do not copy the route name. If the label changes during the trip, use stop_headsign.
15 of 15 trips lack rider-facing destination or direction text. When a route has multiple directions or patterns, the route name alone may not tell riders which service is coming.
⏱ Usually one value per route pattern in your scheduling source.worth about +15 points in its category
Trillium produces and hosts this feed as a service. These changes are made on their side: send the fix list to your Trillium contact and they apply it and republish.
Finding handoff
Move one finding to a recheck
Select one finding. Copy the request, make the change in the feed-producing tool, then compare the next complete run.
- Feed evidence
- 21 of 21 stops don't say whether a wheelchair user can board there.
- Next action
- Set wheelchair_boarding to 1 (accessible) or 2 (not accessible) for every stop. A field survey can start with the busiest stops.
- Recheck
- Publish the changed feed at the same URL. On the next complete, comparable scorecard run, confirm that this finding is no longer reported.
Copy handoff text
- Feed evidence
- 15 of 15 trips don't say whether the vehicle is wheelchair accessible.
- Next action
- Set wheelchair_accessible on every trip. If every vehicle is accessible, this may be one default; otherwise use the value for each trip.
- Recheck
- Publish the changed feed at the same URL. On the next complete, comparable scorecard run, confirm that this finding is no longer reported.
Copy handoff text
- Feed evidence
- 15 of 15 trips lack rider-facing destination or direction text.
- Next action
- Add the destination, direction, or 'via' label riders actually see to trip_headsign. Do not copy the route name. If the label changes during the trip, use stop_headsign.
- Recheck
- Publish the changed feed at the same URL. On the next complete, comparable scorecard run, confirm that this finding is no longer reported.
Copy handoff text
How to make and check these changes
Check the result on the published feed. Read the guide, make the change in your tool, and use the next comparable run to see whether the finding is still reported. Only an action or ticket record can attribute who made the change.
Set wheelchair_boarding to 1 (accessible) or 2 (not accessible) for every stop. A field survey can start with the busiest stops. · Read the fix guide
Make the change. Trillium produces and hosts this feed as a service. These changes are made on their side: send the fix list to your Trillium contact and they apply it and republish.
Check the result. The next scorecard run checks this finding again. If a comparable check no longer reports it, the feed's clearance log records that result. This confirms feed state, not who made the change. Self-check a feed before you publish.
Set wheelchair_accessible on every trip. If every vehicle is accessible, this may be one default; otherwise use the value for each trip. · Read the fix guide
Make the change. Trillium produces and hosts this feed as a service. These changes are made on their side: send the fix list to your Trillium contact and they apply it and republish.
Check the result. The next scorecard run checks this finding again. If a comparable check no longer reports it, the feed's clearance log records that result. This confirms feed state, not who made the change. Self-check a feed before you publish.
Add the destination, direction, or 'via' label riders actually see to trip_headsign. Do not copy the route name. If the label changes during the trip, use stop_headsign. · Read the fix guide
Make the change. Trillium produces and hosts this feed as a service. These changes are made on their side: send the fix list to your Trillium contact and they apply it and republish.
Check the result. The next scorecard run checks this finding again. If a comparable check no longer reports it, the feed's clearance log records that result. This confirms feed state, not who made the change. Self-check a feed before you publish.
Rider view: what this feed publishes
A quick read of rider-facing information in this feed.
- Schedule visibility
- The feed's last published service date is in 1002 days.
- Published accessibility data
- Accessibility information is stated for 0% of stops and 0% of trips. This measures published data, not whether stops or vehicles are physically usable.
- Fare information
- No fare information is published in the feed.
- Realtime information
- Realtime-feed availability and live-arrival coverage are not known from this scorecard.
Important: This does not rate service reliability. Riders should confirm current service alerts, fares, and accessibility accommodations with the transit operator before traveling.
Send Trillium a fix request
This feed is produced and hosted by Trillium. Copy this and send it to your Trillium contact; they make the change and republish the feed. Each fix names the validator notice and a guide link.
Score by category
The MobilityData validator flagged 6 kinds of issue across 23 instances (0 error, 22 warning, 1 informational).
Service data covers the next 1002 days.
0% of stops state wheelchair accessibility (0% marked accessible, 0% marked not accessible). This measures what the feed publishes, not whether a stop is physically usable. Fare data is not published.
0% of stops state accessibility (0% marked accessible). Reflects what the feed states, not verified physical usability.
2 accessibility depth signals
1 route badge(s) pair a color and text color below the WCAG 4.5:1 contrast bar (Lake Region Explorer).
Consider: Adjust route_color or route_text_color so each pair clears 4.5:1. Often switching the text between black and white is enough.
9 stop name(s) use abbreviations or symbols a screen reader may mispronounce, with no spoken form set ("Naples Village/Library (SB)", "Tenney Hill Rd (SB)", "Lakehurst Ave (SB)", and more).
Consider: Add tts_stop_name with the spoken form, e.g. 'Main Street and Second Avenue', for the affected stops.
Opportunities to strengthen the data, not deductions from the sub-score above. States what the second accessibility lens can check from the feed, not verified physical usability.
Not scored yet. Nothing here counts against the grade.
Routes and stops
Each route is drawn once, using the longest shape its trips follow; stops are the dots.
This feed has 21 stops.
The route and stop data is ready below. Load the map only when you want the geographic view. It uses additional data.
Basemap: OpenFreeMap, © OpenStreetMap contributors. Routes and stops: this agency's GTFS feed.
- Lake Region Explorer (blue)
| Route | Type | Line color |
|---|---|---|
| Lake Region Explorer | Bus | blue |
List every stop
- Bridgton Community Center (SB)
- Windham Shopping Center (SB)
- Time4Printing (SB)
- Prides Corner (SB)
- USM/Forest Ave (SB)
- Elm Street Pulse
- USM/Forest Ave (NB)
- Brookhaven Dr. (NB)
- Lakehurst Ave (NB)
- Pt. Sebago Resort (NB)
- Tenney Hill Rd (NB)
- Lake Region High School (SB)
- Naples Village/Library (NB)
- Bridgton Hospital
- Naples Village/Library (SB)
- Naples American Legion (SB)
- Tenney Hill Rd (SB)
- Pt. Sebago Resort (SB)
- South Casco Fire Station (SB)
- Raymond Sunset Variety (SB)
- Lakehurst Ave (SB)
Over time
The producer or measurement contract changed since the prior check, so the trend restarts here. No improvement or regression is claimed across that boundary.
What changed in this feed
The scoring or measurement contract changed since the previous snapshot, so finding and score changes restart here. No issue is described as new, resolved, improved, or regressed across this boundary.
Everything we checked
12 findings, ordered by severity.
Show every finding
- Warning21 instances
21 of 21 stops don't say whether a wheelchair user can board there.
Riders who use wheelchairs can't plan a trip when accessibility is marked 'unknown'; apps show no information at all.
Fix: Set wheelchair_boarding to 1 (accessible) or 2 (not accessible) for every stop. A field survey can start with the busiest stops. (A column in stops.txt; your scheduling software likely has it.)
Finding code: scorecard_wheelchair_boarding_unknown · Read the fix guide · See GTFS Schedule reference (opens the GTFS Schedule reference on an external site)
- Warning15 instances
15 of 15 trips don't say whether the vehicle is wheelchair accessible.
Even with accessible stops, riders need to know the bus itself can take them.
Fix: Set wheelchair_accessible on every trip. If every vehicle is accessible, this may be one default; otherwise use the value for each trip. (A default or per-trip field in your export.)
Finding code: scorecard_wheelchair_accessible_unknown · Read the fix guide · See GTFS Schedule reference (opens the GTFS Schedule reference on an external site)
- Warning15 instances
15 of 15 trips lack rider-facing destination or direction text.
When a route has multiple directions or patterns, the route name alone may not tell riders which service is coming.
Fix: Add the destination, direction, or 'via' label riders actually see to trip_headsign. Do not copy the route name. If the label changes during the trip, use stop_headsign. (Usually one value per route pattern in your scheduling source.)
Finding code: scorecard_missing_headsigns · Read the fix guide · See GTFS Best Practices (opens GTFS Best Practices on an external site)
- Warning14 instances
Some stops exist in the feed but no trip ever stops at them.
Riders may walk to a stop where no bus is scheduled to arrive.
Fix: Remove retired stops from the export, or add them back to the trips that should serve them. (A review pass in your scheduling software.)
Finding code: stop_without_stop_time · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Warning5 instances
Some trips serve fewer than two stops.
A trip with one stop can't be ridden; planners ignore it and it may signal an export problem.
Fix: Check the flagged trips in your scheduling software; remove them or restore their missing stops. (Worth a vendor question if it appears often.)
Finding code: unusable_trip · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Warning1 instance
Some service calendars in the feed have already ended.
Expired calendars are dead weight and can hide real schedule problems from your staff and vendors.
Fix: Remove past service periods the next time you export the feed. (One setting in most export tools.)
Finding code: expired_calendar · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Warning1 instance
Some files leave out fields that GTFS asks for but does not require.
Recommended fields like agency_phone or stop descriptions make the feed more useful to riders and trip planners.
Fix: Review the flagged fields and fill in the ones your riders would use. (A field at a time; not urgent.)
Finding code: missing_recommended_field · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Warning1 instance
A file GTFS asks for (usually feed_info.txt) is missing.
feed_info.txt tells apps who publishes the feed and when it expires; without it nobody is warned before data goes stale.
Fix: Add feed_info.txt with publisher name, URL, language, and feed_start_date/feed_end_date. (One small file, set once in export settings.)
Finding code: missing_recommended_file · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Warning1 instance
feed_info.txt is missing its start/end dates (the file itself is absent)
Apps and this scorecard can't warn anyone before the feed goes stale without stated validity dates.
Fix: Add feed_info.txt with feed_start_date and feed_end_date to your export. (Two fields, set once in export settings.)
Finding code: scorecard_missing_feed_info_dates · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Warning1 instance
The feed contains no fare information.
Riders see 'fare unknown' in trip planners and can't budget their trip; visitors are most affected.
Fix: Add fare_attributes.txt (or Fares v2 files) with your fare structure. If your service is fare-free, ask to have it marked fare-free instead. (A small file for most flat-fare systems.)
Finding code: scorecard_no_fare_data · Read the fix guide · See GTFS Best Practices (opens GTFS Best Practices on an external site)
- Info1 instance
Service extends far in the future (flagged by the MobilityData validator).
See the linked rule for what this affects.
Fix: Review the rule documentation for 'service_extends_far_in_the_future' at https://gtfs-validator.mobilitydata.org/rules.html and check the flagged rows in your feed. (Varies.)
Finding code: service_extends_far_in_the_future · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Info1 instance
feed_info.txt has no technical contact (feed_contact_email or feed_contact_url).
Trip-planning apps and regional data coordinators have nobody to email when they spot a problem with your feed, so problems linger.
Fix: Add feed_contact_email to feed_info.txt. (One field.)
Finding code: scorecard_no_feed_contact · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
NTD GTFS readiness Ready
Published at a public URL, valid, current, and identified with agency_id: the four feed checks for RY2026 all hold here. Only your own D-10 and P-50 filings make that official; this is a heads-up, not a determination.
- Published Ready
- Published at a public URL.
- Valid Ready
- Passes validation with no errors.
- Current Ready
- Service data covers the next 1002 days.
- agency_id provided Ready
- agency.txt provides agency_id. For RY2026, keep one stable value for each NTD reporter represented in the feed and crosswalk each value on the P-50 form.
- agency_id equals your NTD ID (optional) Not checked yet
- This feed provides agency_id. For RY2026, keep one stable value for each NTD reporter represented in the feed and crosswalk it on the P-50 form. The value does not need to equal the five-digit NTD ID; we do not have that ID on file, so the optional equality comparison is not checked yet.
- shapes.txt covers your trips Ready
- All 15 trips have a shape in shapes.txt.
In plain words: if you report to the federal transit database, you have to publish a working, up-to-date feed, provide a stable agency_id for each represented reporter, and confirm the feed and P-50 crosswalk each year. This box is a heads-up; your filings are the official check.
A readiness signal mapping this feed to the FTA National Transit Database GTFS requirement (Report Year 2023 onward: a public, valid, current feed, certified annually on the D-10). For RY2026, each represented reporter needs a stable agency_id, unique within the feed and crosswalked to its five-digit NTD ID on P-50; the values do not need to be equal. FTA also requires shapes.txt in the published GTFS: Full Reporters from Report Year 2025, and Reduced, Rural, and Tribal Reporters from Report Year 2026. Not an official determination; your certification is the official check.
Conformance mark Not yet
This feed is close to the conformance mark. States wheelchair access on 0% of stops and 0% of trips; the mark needs 90% of each.
- Valid Met
- Passes validation with no errors.
- Current Met
- Service data covers the next 1002 days.
- Accessible Not yet
- States wheelchair access on 0% of stops and 0% of trips; the mark needs 90% of each.
In plain words: earn this mark when your feed passes validation, has not expired, and says whether nearly every stop and trip is wheelchair accessible.
A pass credential for a feed that is valid, current, and states wheelchair access on nearly every stop and trip. Accessibility here measures what the feed publishes, not whether a stop is physically usable. How the conformance mark works.
Can riders use it?
Checks beyond structural validation: places where the feed is valid but a rider still could not travel.
- 5 of 15 trips list fewer than two stops. A trip with one stop has no leg a rider can ride; trip planners can't route anyone on it, so the service effectively does not exist. Check your scheduling export: every trip should list each stop it calls at, in order, with times.
- 14 of 21 boardable stops are never served by any trip. Riders see these stops in apps and on the map but can never catch anything there, which erodes trust in the data. Remove stops no route serves, or add the trips that should call at them.
These do not change the grade. They catch trips with no rideable leg and stops no trip serves, the kind of gap a trip planner trips over.
Clears the Google and Apple Maps four-week coverage bar. This feed has 1002 days of service ahead, clearing the four-week (28-day) window Maps asks for. No validator errors either, so riders keep seeing this agency in their trip planners; warnings lower the grade here but do not remove a feed from Maps.
How this agency maps to the standards
The scorecard is a data-quality lens, not a compliance determination. Its universal references describe good GTFS and useful rider information. Useful references here are GTFS Schedule Best Practices, GTFS-Realtime Best Practices, MobilityData grading scheme, Google Transit publication guidance, FTA National Transit Database GTFS requirement. Read the full standards crosswalk.
- Correctness 78 / 100
- GTFS Schedule best practices, checked by the MobilityData validator. MobilityData grading covers stop locations, route names, and colors. Google Transit requires a feed to pass validation for publication. FTA NTD readiness also checks that the published feed is valid.
- Freshness 85 / 100
- GTFS Schedule best practices call for a dataset that stays current. An expired calendar can remove service from Google Transit and other rider trip planners. FTA NTD readiness also checks that the published feed is current.
- Rider experience 22 / 100
- GTFS Best Practices for rider-facing fields. MobilityData grading covers stop names and headsigns.
- Realtime quality Not yet published
- GTFS-Realtime best practices: a stable URL, high uptime, and frequent updates.
Show your grade
Put a badge on your agency site or feed README. It updates after each completed scoring check and links back to this scorecard.
Prefer a shields.io style? Point a dynamic endpoint badge at the published badge.json.
Cite this record
This page updates on every check. The record below does not: it is the dated file this grade came from, published at https://gtfsscorecard.org/data/artifacts/lakes-region-explorer/2026-08-01.json and never overwritten, pinning the grade, category scores, rubric version, validator version, reader archive profile, and the scored feed's sha256 as they stood on 2026-08-01. Use it in a board packet, a regulatory filing, or a research citation instead of linking the live page, whose content will differ on your next visit.
Citing the tool itself rather than one agency's record? Use the repo's CITATION.cff.