Gold Coast Transit, South Coast Area Transit

Some trips have stop times whose distances along the route go backwards.

Apps can show buses jumping backwards or mis-order stops.

Fix: Re-generate shape distances in your export; flag to your vendor if it persists. (Usually an export-tool fix, not hand editing.)

Finding code: decreasing_or_equal_stop_time_distance · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Missing timepoint value (flagged by the MobilityData validator).

See the linked rule for what this affects.

Fix: Review the rule documentation for 'missing_timepoint_value' at https://gtfs-validator.mobilitydata.org/rules.html and check the flagged rows in your feed. (Varies.)

Finding code: missing_timepoint_value · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

1226 of 1226 trips don't say whether the vehicle is wheelchair accessible.

Even with accessible stops, riders need to know the bus itself can take them.

Fix: Set wheelchair_accessible on every trip. If every vehicle is accessible, this may be one default; otherwise use the value for each trip. (A default or per-trip field in your export.)

Finding code: scorecard_wheelchair_accessible_unknown · Read the fix guide · See GTFS Schedule reference (opens the GTFS Schedule reference on an external site)

Some rider-facing names are in ALL CAPS or all lowercase.

ALL-CAPS stop and headsign names are harder to read in apps and are read awkwardly by screen readers.

Fix: Use mixed case for stop names and headsigns (e.g. 'Main St & 2nd Ave', not 'MAIN ST & 2ND AVE'). (Often a bulk fix in your scheduling software.)

Finding code: mixed_case_recommended_field · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

645 of 645 stops don't say whether a wheelchair user can board there.

Riders who use wheelchairs can't plan a trip when accessibility is marked 'unknown'; apps show no information at all.

Fix: Set wheelchair_boarding to 1 (accessible) or 2 (not accessible) for every stop. A field survey can start with the busiest stops. (A column in stops.txt; your scheduling software likely has it.)

Finding code: scorecard_wheelchair_boarding_unknown · Read the fix guide · See GTFS Schedule reference (opens the GTFS Schedule reference on an external site)

Some service calendars have no days of the week switched on.

Trips tied to these calendars never run; they are dead data that can mask real schedule problems.

Fix: Delete the empty calendars or set their service days. (A few minutes in your scheduling software.)

Finding code: service_has_no_active_day_of_the_week · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Some stops sit far from the route line, going by the feed's own distance values.

Trip planners may draw the route down the wrong streets or point riders to the wrong corner.

Fix: Check the flagged stops' shape_dist_traveled against the route shape, and re-generate it on export if they disagree. (Usually an export-tool fix, not hand editing.)

Finding code: stop_too_far_from_shape_using_user_distance · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

45 of 1226 trips lack rider-facing destination or direction text.

When a route has multiple directions or patterns, the route name alone may not tell riders which service is coming.

Fix: Add the destination, direction, or 'via' label riders actually see to trip_headsign. Do not copy the route name. If the label changes during the trip, use stop_headsign. (Usually one value per route pattern in your scheduling source.)

Finding code: scorecard_missing_headsigns · Read the fix guide · See GTFS Best Practices (opens GTFS Best Practices on an external site)

Some files leave out fields that GTFS asks for but does not require.

Recommended fields like agency_phone or stop descriptions make the feed more useful to riders and trip planners.

Fix: Review the flagged fields and fill in the ones your riders would use. (A field at a time; not urgent.)

Finding code: missing_recommended_field · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Some route lines list the same point twice in a row.

Repeated points don't hurt riders, but they can skew distance math and hint at a shaky export.

Fix: Turn on shape cleanup in your export tool, or drop the repeated points from shapes.txt. (Usually one export setting.)

Finding code: equal_shape_distance_same_coordinates · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

On some trips the stop distances run a little past the end of the route line.

The stop and shape distance values don't quite line up, so any math that uses them can drift.

Fix: Re-generate shape_dist_traveled on export so stop and shape distances use the same units. (Usually an export-tool fix, not hand editing.)

Finding code: trip_distance_exceeds_shape_distance_below_threshold · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Equal shape distance diff coordinates distance below threshold (flagged by the MobilityData validator).

See the linked rule for what this affects.

Fix: Review the rule documentation for 'equal_shape_distance_diff_coordinates_distance_below_threshold' at https://gtfs-validator.mobilitydata.org/rules.html and check the flagged rows in your feed. (Varies.)

Finding code: equal_shape_distance_diff_coordinates_distance_below_threshold · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

A file GTFS asks for (usually feed_info.txt) is missing.

feed_info.txt tells apps who publishes the feed and when it expires; without it nobody is warned before data goes stale.

Fix: Add feed_info.txt with publisher name, URL, language, and feed_start_date/feed_end_date. (One small file, set once in export settings.)

Finding code: missing_recommended_file · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Many of the feed's trips don't run at all in the next 7 days.

It usually means old service periods are still in the export, making the feed bigger and harder to check.

Fix: Trim past service periods the next time you export. (One setting in most export tools.)

Finding code: trip_coverage_not_active_for_next7_days · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

feed_info.txt is missing its start/end dates (the file itself is absent)

Apps and this scorecard can't warn anyone before the feed goes stale without stated validity dates.

Fix: Add feed_info.txt with feed_start_date and feed_end_date to your export. (Two fields, set once in export settings.)

Finding code: scorecard_missing_feed_info_dates · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Future calendar (flagged by the MobilityData validator).

See the linked rule for what this affects.

Fix: Review the rule documentation for 'future_calendar' at https://gtfs-validator.mobilitydata.org/rules.html and check the flagged rows in your feed. (Varies.)

Finding code: future_calendar · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

feed_info.txt has no technical contact (feed_contact_email or feed_contact_url).

Trip-planning apps and regional data coordinators have nobody to email when they spot a problem with your feed, so problems linger.

Fix: Add feed_contact_email to feed_info.txt. (One field.)

Finding code: scorecard_no_feed_contact · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)