Frederick County TransIT

Stop time timepoint without times (flagged by the MobilityData validator).

See the linked rule for what this affects.

Fix: Review the rule documentation for 'stop_time_timepoint_without_times' at https://gtfs-validator.mobilitydata.org/rules.html and check the flagged rows in your feed. (Varies.)

Finding code: stop_time_timepoint_without_times · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Some trips have stop times whose distances along the route go backwards.

Apps can show buses jumping backwards or mis-order stops.

Fix: Re-generate shape distances in your export; flag to your vendor if it persists. (Usually an export-tool fix, not hand editing.)

Finding code: decreasing_or_equal_stop_time_distance · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Service data ended 520 day(s) ago.

When the calendar runs out, trip planners stop showing this agency even though the buses are still running. Riders are told the service does not exist.

Fix: Re-export the feed with a calendar that reaches further out, and set feed_info feed_end_date past your next service change. (Usually one export setting; export on a schedule so it never lapses again.)

Finding code: scorecard_feed_expired · Read the fix guide · See GTFS Best Practices (opens GTFS Best Practices on an external site)

383 of 383 stops don't say whether a wheelchair user can board there.

Riders who use wheelchairs can't plan a trip when accessibility is marked 'unknown'; apps show no information at all.

Fix: Set wheelchair_boarding to 1 (accessible) or 2 (not accessible) for every stop. A field survey can start with the busiest stops. (A column in stops.txt; your scheduling software likely has it.)

Finding code: scorecard_wheelchair_boarding_unknown · Read the fix guide · See GTFS Schedule reference (opens the GTFS Schedule reference on an external site)

Some route lines list the same point twice in a row.

Repeated points don't hurt riders, but they can skew distance math and hint at a shaky export.

Fix: Turn on shape cleanup in your export tool, or drop the repeated points from shapes.txt. (Usually one export setting.)

Finding code: equal_shape_distance_same_coordinates · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

10 of 824 trips lack rider-facing destination or direction text.

When a route has multiple directions or patterns, the route name alone may not tell riders which service is coming.

Fix: Add the destination, direction, or 'via' label riders actually see to trip_headsign. Do not copy the route name. If the label changes during the trip, use stop_headsign. (Usually one value per route pattern in your scheduling source.)

Finding code: scorecard_missing_headsigns · Read the fix guide · See GTFS Best Practices (opens GTFS Best Practices on an external site)

Some stops sit far from the route line, going by the feed's own distance values.

Trip planners may draw the route down the wrong streets or point riders to the wrong corner.

Fix: Check the flagged stops' shape_dist_traveled against the route shape, and re-generate it on export if they disagree. (Usually an export-tool fix, not hand editing.)

Finding code: stop_too_far_from_shape_using_user_distance · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Some service calendars in the feed have already ended.

Expired calendars are dead weight and can hide real schedule problems from your staff and vendors.

Fix: Remove past service periods the next time you export the feed. (One setting in most export tools.)

Finding code: expired_calendar · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Some stops sit far from the route line they belong to.

Trip planners may draw the bus route through the wrong streets or point riders to the wrong corner.

Fix: Check the flagged stops' coordinates and the route shape in your scheduling software; re-snap whichever is misplaced. (A few minutes per flagged stop.)

Finding code: stop_too_far_from_shape · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Some stops exist in the feed but no trip ever stops at them.

Riders may walk to a stop where no bus is scheduled to arrive.

Fix: Remove retired stops from the export, or add them back to the trips that should serve them. (A review pass in your scheduling software.)

Finding code: stop_without_stop_time · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

2 of 824 trips don't say whether the vehicle is wheelchair accessible.

Even with accessible stops, riders need to know the bus itself can take them.

Fix: Set wheelchair_accessible on every trip. If every vehicle is accessible, this may be one default; otherwise use the value for each trip. (A default or per-trip field in your export.)

Finding code: scorecard_wheelchair_accessible_unknown · Read the fix guide · See GTFS Schedule reference (opens the GTFS Schedule reference on an external site)

This feed's service calendar runs out within the next 7 days.

When the calendar ends, Google Maps and other trip planners drop your agency entirely. Riders see no service at all.

Fix: Export and publish an updated GTFS feed that covers at least the next 30 days of service. (Usually a re-export from your scheduling software.)

Finding code: feed_expiration_date7_days · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Many of the feed's trips don't run at all in the next 7 days.

It usually means old service periods are still in the export, making the feed bigger and harder to check.

Fix: Trim past service periods the next time you export. (One setting in most export tools.)

Finding code: trip_coverage_not_active_for_next7_days · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

The feed has a stretch of two weeks or more with no service running.

A long gap can mean dates were left out of the calendar. Apps then show no trips on those days.

Fix: Check whether the gap is real, like a seasonal break; if not, add the missing dates to the calendar. (A review of your calendar dates.)

Finding code: big_gap_in_service · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Some service dates fall outside the date window set in feed_info.txt.

feed_info.txt should span every day your service runs, so apps know when the data applies.

Fix: Widen feed_start_date and feed_end_date to cover all service dates, or fix the dates that fall outside. (Two fields in feed_info.txt, or one export setting.)

Finding code: service_window_outside_feed_period · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)