MAT (Saint-Malo Agglomération)

Trip distance exceeds shape distance (flagged by the MobilityData validator).

See the linked rule for what this affects.

Fix: Review the rule documentation for 'trip_distance_exceeds_shape_distance' at https://gtfs-validator.mobilitydata.org/rules.html and check the flagged rows in your feed. (Varies.)

Finding code: trip_distance_exceeds_shape_distance · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Some trips have stop times whose distances along the route go backwards.

Apps can show buses jumping backwards or mis-order stops.

Fix: Re-generate shape distances in your export; flag to your vendor if it persists. (Usually an export-tool fix, not hand editing.)

Finding code: decreasing_or_equal_stop_time_distance · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Some rider-facing names are in ALL CAPS or all lowercase.

ALL-CAPS stop and headsign names are harder to read in apps and are read awkwardly by screen readers.

Fix: Use mixed case for stop names and headsigns (e.g. 'Main St & 2nd Ave', not 'MAIN ST & 2ND AVE'). (Often a bulk fix in your scheduling software.)

Finding code: mixed_case_recommended_field · Read the fix guide for mixed_case_recommended_field · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

On some trips the stop distances run a little past the end of the route line.

The stop and shape distance values don't quite line up, so any math that uses them can drift.

Fix: Re-generate shape_dist_traveled on export so stop and shape distances use the same units. (Usually an export-tool fix, not hand editing.)

Finding code: trip_distance_exceeds_shape_distance_below_threshold · Read the fix guide for trip_distance_exceeds_shape_distance_below_threshold · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Some route lines list the same point twice in a row.

Repeated points don't hurt riders, but they can skew distance math and hint at a shaky export.

Fix: Turn on shape cleanup in your export tool, or drop the repeated points from shapes.txt. (Usually one export setting.)

Finding code: equal_shape_distance_same_coordinates · Read the fix guide for equal_shape_distance_same_coordinates · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

830 of 1145 stops don't say whether a wheelchair user can board there.

Riders who use wheelchairs can't plan a trip when accessibility is marked 'unknown'; apps show no information at all.

Fix: Set wheelchair_boarding to 1 (accessible) or 2 (not accessible) for every stop. A field survey can start with the busiest stops. (A column in stops.txt; your scheduling software likely has it.)

Finding code: scorecard_wheelchair_boarding_unknown · Read the fix guide for scorecard_wheelchair_boarding_unknown · See GTFS Schedule reference (opens the GTFS Schedule reference on an external site)

Some stops sit far from the route line, going by the feed's own distance values.

Trip planners may draw the route down the wrong streets or point riders to the wrong corner.

Fix: Check the flagged stops' shape_dist_traveled against the route shape, and re-generate it on export if they disagree. (Usually an export-tool fix, not hand editing.)

Finding code: stop_too_far_from_shape_using_user_distance · Read the fix guide for stop_too_far_from_shape_using_user_distance · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Equal shape distance diff coordinates distance below threshold (flagged by the MobilityData validator).

See the linked rule for what this affects.

Fix: Review the rule documentation for 'equal_shape_distance_diff_coordinates_distance_below_threshold' at https://gtfs-validator.mobilitydata.org/rules.html and check the flagged rows in your feed. (Varies.)

Finding code: equal_shape_distance_diff_coordinates_distance_below_threshold · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

11 of 33 trips scheduled during the sampling window had no live predictions.

Riders on those trips get schedule times labeled as live. Caltrans asks that every trip you run shows up in TripUpdates.

Fix: Ask your AVL vendor to check that every vehicle assignment reaches TripUpdates. School-day and tripper runs are the ones most often left out. (A vendor data-mapping question.)

Finding code: scorecard_rt_trip_coverage · Read the fix guide for scorecard_rt_trip_coverage · See GTFS-Realtime reference (opens the GTFS-Realtime reference on an external site)

Some stops sit far from the route line they belong to.

Trip planners may draw the bus route through the wrong streets or point riders to the wrong corner.

Fix: Check the flagged stops' coordinates and the route shape in your scheduling software; re-snap whichever is misplaced. (A few minutes per flagged stop.)

Finding code: stop_too_far_from_shape · Read the fix guide for stop_too_far_from_shape · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Some stops exist in the feed but no trip ever stops at them.

Riders may walk to a stop where no bus is scheduled to arrive.

Fix: Remove retired stops from the export, or add them back to the trips that should serve them. (A review pass in your scheduling software.)

Finding code: stop_without_stop_time · Read the fix guide for stop_without_stop_time · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

On some trips the stops fall along the route line in a different order than the schedule lists.

Trip planners can draw the bus doubling back or skipping ahead, which confuses riders reading the map.

Fix: Check the stop order and the shape direction in your scheduling software; the shape is often drawn backwards. (A few minutes per flagged trip.)

Finding code: stops_match_shape_out_of_order · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Many of the feed's trips don't run at all in the next 7 days.

It usually means old service periods are still in the export, making the feed bigger and harder to check.

Fix: Trim past service periods the next time you export. (One setting in most export tools.)

Finding code: trip_coverage_not_active_for_next7_days · Read the fix guide for trip_coverage_not_active_for_next7_days · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

This feed models stations or entrances but has no pathways.txt.

Trip planners can't guide riders through the station, and there is no step-free route information for wheelchair users.

Fix: Add pathways.txt to link entrances, platforms, and elevators. Give each one a level. (Worth it for multi-level or large stations; flat stops don't need it.)

Finding code: scorecard_station_no_pathways · Read the fix guide for scorecard_station_no_pathways · See GTFS Schedule reference (opens the GTFS Schedule reference on an external site)

The feed has a stretch of two weeks or more with no service running.

A long gap can mean dates were left out of the calendar. Apps then show no trips on those days.

Fix: Check whether the gap is real, like a seasonal break; if not, add the missing dates to the calendar. (A review of your calendar dates.)

Finding code: big_gap_in_service · Read the fix guide for big_gap_in_service · See MobilityData GTFS Validator rules (opens the validator rules on an external site)