Clallam Transit System

Trip distance exceeds shape distance (flagged by the MobilityData validator).

See the linked rule for what this affects.

Fix: Review the rule documentation for 'trip_distance_exceeds_shape_distance' at https://gtfs-validator.mobilitydata.org/rules.html and check the flagged rows in your feed. (Varies.)

Finding code: trip_distance_exceeds_shape_distance · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

321 of 334 stops don't say whether a wheelchair user can board there.

Riders who use wheelchairs can't plan a trip when accessibility is marked 'unknown'; apps show no information at all.

Fix: Set wheelchair_boarding to 1 (accessible) or 2 (not accessible) for every stop. A field survey can start with the busiest stops. (A column in stops.txt; your scheduling software likely has it.)

Finding code: scorecard_wheelchair_boarding_unknown · Read the fix guide for scorecard_wheelchair_boarding_unknown · See GTFS Schedule reference (opens the GTFS Schedule reference on an external site)

On some trips the stop distances run a little past the end of the route line.

The stop and shape distance values don't quite line up, so any math that uses them can drift.

Fix: Re-generate shape_dist_traveled on export so stop and shape distances use the same units. (Usually an export-tool fix, not hand editing.)

Finding code: trip_distance_exceeds_shape_distance_below_threshold · Read the fix guide for trip_distance_exceeds_shape_distance_below_threshold · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

68 of 1318 trips have no headsign, the text that tells riders where the bus is going. A trip counts when it has trip_headsign or a stop_headsign at every stop.

When a route has multiple directions or patterns, the route name alone may not tell riders which service is coming.

Fix: Add the destination, direction, or 'via' label riders actually see to trip_headsign. Do not copy the route name. If the label changes during the trip, use stop_headsign. (Usually one value per route pattern in your scheduling source.)

Finding code: scorecard_missing_headsigns · Read the fix guide for scorecard_missing_headsigns · See GTFS Best Practices (opens GTFS Best Practices on an external site)

Some stops sit far from the route line, going by the feed's own distance values.

Trip planners may draw the route down the wrong streets or point riders to the wrong corner.

Fix: Check the flagged stops' shape_dist_traveled against the route shape, and re-generate it on export if they disagree. (Usually an export-tool fix, not hand editing.)

Finding code: stop_too_far_from_shape_using_user_distance · Read the fix guide for stop_too_far_from_shape_using_user_distance · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

20 of 1318 trips don't say whether the vehicle is wheelchair accessible.

Even with accessible stops, riders need to know the bus itself can take them.

Fix: Set wheelchair_accessible on every trip. If every vehicle is accessible, this may be one default; otherwise use the value for each trip. (A default or per-trip field in your export.)

Finding code: scorecard_wheelchair_accessible_unknown · Read the fix guide for scorecard_wheelchair_accessible_unknown · See GTFS Schedule reference (opens the GTFS Schedule reference on an external site)

Some rider-facing names are in ALL CAPS or all lowercase.

ALL-CAPS stop and headsign names are harder to read in apps and are read awkwardly by screen readers.

Fix: Use mixed case for stop names and headsigns (e.g. 'Main St & 2nd Ave', not 'MAIN ST & 2ND AVE'). (Often a bulk fix in your scheduling software.)

Finding code: mixed_case_recommended_field · Read the fix guide for mixed_case_recommended_field · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Some stops sit far from the route line they belong to.

Trip planners may draw the bus route through the wrong streets or point riders to the wrong corner.

Fix: Check the flagged stops' coordinates and the route shape in your scheduling software; re-snap whichever is misplaced. (A few minutes per flagged stop.)

Finding code: stop_too_far_from_shape · Read the fix guide for stop_too_far_from_shape · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Unsorted stop times (flagged by the MobilityData validator).

See the linked rule for what this affects.

Fix: Review the rule documentation for 'unsorted_stop_times' at https://gtfs-validator.mobilitydata.org/rules.html and check the flagged rows in your feed. (Varies.)

Finding code: unsorted_stop_times · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Some trip headsigns name a stop along the way, not the final destination.

The sign should tell riders where the bus ends up, so a midpoint name can send them the wrong way.

Fix: Set trip_headsign to the trip's last stop or its overall destination. (Usually a bulk edit in your scheduling software.)

Finding code: trip_headsign_matches_intermediate_stop · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

The feed has a stretch of two weeks or more with no service running.

A long gap can mean dates were left out of the calendar. Apps then show no trips on those days.

Fix: Check whether the gap is real, like a seasonal break; if not, add the missing dates to the calendar. (A review of your calendar dates.)

Finding code: big_gap_in_service · Read the fix guide for big_gap_in_service · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Some files contain columns that are not part of the GTFS spec.

Harmless to riders, but apps ignore these columns and they can hide typos in real column names.

Fix: Check the flagged column names for misspellings of standard GTFS fields; remove them if they are vendor extras. (A quick look at the flagged files.)

Finding code: unknown_column · Read the fix guide for unknown_column · See MobilityData GTFS Validator rules (opens the validator rules on an external site)