St Lawrence County Public Transit

153 of 153 stops don't say whether a wheelchair user can board there.

Riders who use wheelchairs can't plan a trip when accessibility is marked 'unknown'; apps show no information at all.

Fix: Set wheelchair_boarding to 1 (accessible) or 2 (not accessible) for every stop. A field survey can start with the busiest stops. (A column in stops.txt; your scheduling software likely has it.)

Finding code: scorecard_wheelchair_boarding_unknown · Read the fix guide · See GTFS Schedule reference (opens the GTFS Schedule reference on an external site)

134 of 162 trips don't say whether the vehicle is wheelchair accessible.

Even with accessible stops, riders need to know the bus itself can take them.

Fix: Set wheelchair_accessible on every trip. If every vehicle is accessible, this may be one default; otherwise use the value for each trip. (A default or per-trip field in your export.)

Finding code: scorecard_wheelchair_accessible_unknown · Read the fix guide · See GTFS Schedule reference (opens the GTFS Schedule reference on an external site)

128 of 162 trips lack rider-facing destination or direction text.

When a route has multiple directions or patterns, the route name alone may not tell riders which service is coming.

Fix: Add the destination, direction, or 'via' label riders actually see to trip_headsign. Do not copy the route name. If the label changes during the trip, use stop_headsign. (Usually one value per route pattern in your scheduling source.)

Finding code: scorecard_missing_headsigns · Read the fix guide · See GTFS Best Practices (opens GTFS Best Practices on an external site)

Some stops sit far from the route line they belong to.

Trip planners may draw the bus route through the wrong streets or point riders to the wrong corner.

Fix: Check the flagged stops' coordinates and the route shape in your scheduling software; re-snap whichever is misplaced. (A few minutes per flagged stop.)

Finding code: stop_too_far_from_shape · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Some stops exist in the feed but no trip ever stops at them.

Riders may walk to a stop where no bus is scheduled to arrive.

Fix: Remove retired stops from the export, or add them back to the trips that should serve them. (A review pass in your scheduling software.)

Finding code: stop_without_stop_time · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Some stops sit far from the route line, going by the feed's own distance values.

Trip planners may draw the route down the wrong streets or point riders to the wrong corner.

Fix: Check the flagged stops' shape_dist_traveled against the route shape, and re-generate it on export if they disagree. (Usually an export-tool fix, not hand editing.)

Finding code: stop_too_far_from_shape_using_user_distance · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

On some trips the stops fall along the route line in a different order than the schedule lists.

Trip planners can draw the bus doubling back or skipping ahead, which confuses riders reading the map.

Fix: Check the stop order and the shape direction in your scheduling software; the shape is often drawn backwards. (A few minutes per flagged trip.)

Finding code: stops_match_shape_out_of_order · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Some service calendars in the feed have already ended.

Expired calendars are dead weight and can hide real schedule problems from your staff and vendors.

Fix: Remove past service periods the next time you export the feed. (One setting in most export tools.)

Finding code: expired_calendar · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

The feed contains no fare information.

Riders see 'fare unknown' in trip planners and can't budget their trip; visitors are most affected.

Fix: Add fare_attributes.txt (or Fares v2 files) with your fare structure. If your service is fare-free, ask to have it marked fare-free instead. (A small file for most flat-fare systems.)

Finding code: scorecard_no_fare_data · Read the fix guide · See GTFS Best Practices (opens GTFS Best Practices on an external site)

Some service dates fall outside the date window set in feed_info.txt.

feed_info.txt should span every day your service runs, so apps know when the data applies.

Fix: Widen feed_start_date and feed_end_date to cover all service dates, or fix the dates that fall outside. (Two fields in feed_info.txt, or one export setting.)

Finding code: service_window_outside_feed_period · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

The feed has a stretch of two weeks or more with no service running.

A long gap can mean dates were left out of the calendar. Apps then show no trips on those days.

Fix: Check whether the gap is real, like a seasonal break; if not, add the missing dates to the calendar. (A review of your calendar dates.)

Finding code: big_gap_in_service · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)