Gwinnett County Transit

A file is missing a column that GTFS requires.

Apps may reject the whole file, so riders could lose the affected routes or stops.

Fix: Add the required column named in the finding to the flagged file. (Often an export setting; ask your vendor if it recurs.)

Finding code: missing_required_column · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Service data ended 2038 day(s) ago.

When the calendar runs out, trip planners stop showing this agency even though the buses are still running. Riders are told the service does not exist.

Fix: Re-export the feed with a calendar that reaches further out, and set feed_info feed_end_date past your next service change. (Usually one export setting; export on a schedule so it never lapses again.)

Finding code: scorecard_feed_expired · Read the fix guide · See GTFS Best Practices (opens GTFS Best Practices on an external site)

1456 of 1456 trips don't say whether the vehicle is wheelchair accessible.

Even with accessible stops, riders need to know the bus itself can take them.

Fix: Set wheelchair_accessible on every trip. If every vehicle is accessible, this may be one default; otherwise use the value for each trip. (A default or per-trip field in your export.)

Finding code: scorecard_wheelchair_accessible_unknown · Read the fix guide · See GTFS Schedule reference (opens the GTFS Schedule reference on an external site)

821 of 821 stops don't say whether a wheelchair user can board there.

Riders who use wheelchairs can't plan a trip when accessibility is marked 'unknown'; apps show no information at all.

Fix: Set wheelchair_boarding to 1 (accessible) or 2 (not accessible) for every stop. A field survey can start with the busiest stops. (A column in stops.txt; your scheduling software likely has it.)

Finding code: scorecard_wheelchair_boarding_unknown · Read the fix guide · See GTFS Schedule reference (opens the GTFS Schedule reference on an external site)

711 of 1456 trips lack rider-facing destination or direction text.

When a route has multiple directions or patterns, the route name alone may not tell riders which service is coming.

Fix: Add the destination, direction, or 'via' label riders actually see to trip_headsign. Do not copy the route name. If the label changes during the trip, use stop_headsign. (Usually one value per route pattern in your scheduling source.)

Finding code: scorecard_missing_headsigns · Read the fix guide · See GTFS Best Practices (opens GTFS Best Practices on an external site)

Some stops sit far from the route line, going by the feed's own distance values.

Trip planners may draw the route down the wrong streets or point riders to the wrong corner.

Fix: Check the flagged stops' shape_dist_traveled against the route shape, and re-generate it on export if they disagree. (Usually an export-tool fix, not hand editing.)

Finding code: stop_too_far_from_shape_using_user_distance · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Some stops exist in the feed but no trip ever stops at them.

Riders may walk to a stop where no bus is scheduled to arrive.

Fix: Remove retired stops from the export, or add them back to the trips that should serve them. (A review pass in your scheduling software.)

Finding code: stop_without_stop_time · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Some service calendars in the feed have already ended.

Expired calendars are dead weight and can hide real schedule problems from your staff and vendors.

Fix: Remove past service periods the next time you export the feed. (One setting in most export tools.)

Finding code: expired_calendar · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

This feed's service calendar runs out within the next 7 days.

When the calendar ends, Google Maps and other trip planners drop your agency entirely. Riders see no service at all.

Fix: Export and publish an updated GTFS feed that covers at least the next 30 days of service. (Usually a re-export from your scheduling software.)

Finding code: feed_expiration_date7_days · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

On some trips the stops fall along the route line in a different order than the schedule lists.

Trip planners can draw the bus doubling back or skipping ahead, which confuses riders reading the map.

Fix: Check the stop order and the shape direction in your scheduling software; the shape is often drawn backwards. (A few minutes per flagged trip.)

Finding code: stops_match_shape_out_of_order · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Many of the feed's trips don't run at all in the next 7 days.

It usually means old service periods are still in the export, making the feed bigger and harder to check.

Fix: Trim past service periods the next time you export. (One setting in most export tools.)

Finding code: trip_coverage_not_active_for_next7_days · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

This feed models stations or entrances but has no pathways.txt.

Trip planners can't guide riders through the station, and there is no step-free route information for wheelchair users.

Fix: Add pathways.txt connecting entrances, platforms, and any elevators, with a level for each. (Worth it for multi-level or large stations; flat stops don't need it.)

Finding code: scorecard_station_no_pathways · Read the fix guide · See GTFS Schedule reference (opens the GTFS Schedule reference on an external site)

Some files contain columns that are not part of the GTFS spec.

Harmless to riders, but apps ignore these columns and they can hide typos in real column names.

Fix: Check the flagged column names for misspellings of standard GTFS fields; remove them if they are vendor extras. (A quick look at the flagged files.)

Finding code: unknown_column · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Stop without zone id (flagged by the MobilityData validator).

See the linked rule for what this affects.

Fix: Review the rule documentation for 'stop_without_zone_id' at https://gtfs-validator.mobilitydata.org/rules.html and check the flagged rows in your feed. (Varies.)

Finding code: stop_without_zone_id · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

The feed includes a file that is not part of the GTFS spec.

Apps ignore files they don't know, and a stray file can hide a misspelled standard file name.

Fix: Check the flagged file name for a typo of a standard GTFS file. Remove it if it is a vendor extra. (A quick look at the flagged file.)

Finding code: unknown_file · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Some service dates fall outside the date window set in feed_info.txt.

feed_info.txt should span every day your service runs, so apps know when the data applies.

Fix: Widen feed_start_date and feed_end_date to cover all service dates, or fix the dates that fall outside. (Two fields in feed_info.txt, or one export setting.)

Finding code: service_window_outside_feed_period · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)