GTFS Scorecard
← All agencies

Feed status · checked 2026-07-24

Réseau urbain Pays des Ecrins

Based on the feed this agency publishes

Service mode Bus

52.5 / 100

First scorecard for this agency

Catalogued in Provence-Alpes-Côte-d’Azur, France.

Covers 160 daysAccessibility gapsRealtime not yet published

A data-quality and completeness lens to help an agency improve its GTFS feed. Not an official compliance determination from any transit program. New to this? How to read your scorecard. Interactive view of this scorecard. Rubric v1.2, validator 8.0.1.

Measured 3 of 4 score categories from the agency's own feed.

How we measured this

Confidence in this measurement: medium.

  • Realtime quality was not measured this run. It does not count against the grade.
  • The feed was downloaded from the agency's own URL.

Confidence describes how much the pipeline could measure this run, not the feed itself. It never changes the grade.

Top things to fix

Fix 01

Set wheelchair_boarding to 1 (accessible) or 2 (not accessible) for every stop. A field survey can start with the busiest stops.Likely your team

65 of 65 stops don't say whether a wheelchair user can board there. Riders who use wheelchairs can't plan a trip when accessibility is marked 'unknown'; apps show no information at all.

⏱ A column in stops.txt; your scheduling software likely has it.worth about +25 points in its category

Fix 02

Set wheelchair_accessible on every trip. If every vehicle is accessible, this may be one default; otherwise use the value for each trip.Likely your export tool

75 of 75 trips don't say whether the vehicle is wheelchair accessible. Even with accessible stops, riders need to know the bus itself can take them.

⏱ A default or per-trip field in your export.worth about +15 points in its category

Fix 03

Add feed_info.txt with feed_start_date and feed_end_date to your export.Likely your export tool

feed_info.txt is missing its start/end dates (the file itself is absent) Apps and this scorecard can't warn anyone before the feed goes stale without stated validity dates.

⏱ Two fields, set once in export settings.worth about +15 points in its category

How to make and check these changes

Check the result on the published feed. Read the guide, make the change in your tool, and use the next comparable run to see whether the finding is still reported. Only an action or ticket record can attribute who made the change.

  1. Set wheelchair_boarding to 1 (accessible) or 2 (not accessible) for every stop. A field survey can start with the busiest stops. · Read the fix guide

    Make the change. Make this change in whatever tool produces your feed, then re-export.

    Check the result. The next scorecard run checks this finding again. If a comparable check no longer reports it, the feed's clearance log records that result. This confirms feed state, not who made the change. Self-check a feed before you publish.

  2. Set wheelchair_accessible on every trip. If every vehicle is accessible, this may be one default; otherwise use the value for each trip. · Read the fix guide

    Make the change. Make this change in whatever tool produces your feed, then re-export.

    Check the result. The next scorecard run checks this finding again. If a comparable check no longer reports it, the feed's clearance log records that result. This confirms feed state, not who made the change. Self-check a feed before you publish.

  3. Add feed_info.txt with feed_start_date and feed_end_date to your export. · Read the fix guide

    Make the change. Make this change in whatever tool produces your feed, then re-export.

    Check the result. The next scorecard run checks this finding again. If a comparable check no longer reports it, the feed's clearance log records that result. This confirms feed state, not who made the change. Self-check a feed before you publish.

Rider view: what this feed publishes

A quick read of rider-facing information in this feed.

Schedule visibility
The feed's last published service date is in 160 days.
Published accessibility data
Accessibility information is stated for 0% of stops and 0% of trips. This measures published data, not whether stops or vehicles are physically usable.
Fare information
No fare information is published in the feed.
Realtime information
Realtime-feed availability and live-arrival coverage are not known from this scorecard.

Important: This does not rate service reliability. Riders should confirm current service alerts, fares, and accessibility accommodations with the transit operator before traveling.

Send your vendor a fix request

You may not control the GTFS export yourself. Copy this and send it to whoever runs your scheduling software export. It names each fix with the validator notice and a guide link.

Score by category

Correctness54.0 / 100

The MobilityData validator flagged 11 kinds of issue across 1026 instances (0 error, 946 warning, 80 informational).

Freshness85.0 / 100

Service data covers the next 160 days.

Rider experience24.3 / 100

0% of stops state wheelchair accessibility (0% marked accessible, 0% marked not accessible). This measures what the feed publishes, not whether a stop is physically usable. Fare data is not published.

Accessibility0 / 100

0% of stops state accessibility (0% marked accessible). Reflects what the feed states, not verified physical usability.

2 accessibility depth signals

  • 1 route badge(s) pair a color and text color below the WCAG 4.5:1 contrast bar (L2).

    Consider: Adjust route_color or route_text_color so each pair clears 4.5:1. Often switching the text between black and white is enough.

  • 2 stop name(s) use abbreviations or symbols a screen reader may mispronounce, with no spoken form set ("Ecole St Antoine", "St Martin Village").

    Consider: Add tts_stop_name with the spoken form, e.g. 'Main Street and Second Avenue', for the affected stops.

Opportunities to strengthen the data, not deductions from the sub-score above. States what the second accessibility lens can check from the feed, not verified physical usability.

Realtime qualityNot yet measured

Not scored yet. Nothing here counts against the grade.

Routes and stops

Each route is drawn once, using the longest shape its trips follow; stops are the dots.

Skip to route and stop data

Basemap: OpenFreeMap, © OpenStreetMap contributors. Routes and stops: this agency's GTFS feed.

  • A (teal)
  • B (yellow)
  • C (gray)
  • L1 (pink)
  • L2 (blue)
Routes in Réseau urbain Pays des Ecrins's feed
RouteTypeLine color
ABusteal
B ESTIBUS BBusyellow
CBusgray
L1Buspink
L2 L2 LA ROCHE ST MARTINBusblue

This feed has 65 stops.

List every stop
  • Ailefroide Camping
  • Ailefroide Village
  • Avenue de Vallouise
  • Carrefour de l'Aiglière
  • Maison du Miel
  • Chapelle de Béassac
  • Clot des Léothauds
  • Pl R. Demaison
  • Entre les Aygues
  • Le Kiosque
  • Grand Champ
  • Gérendoine
  • Hameau de Pallon
  • La Bâtie
  • La Casse Commerces
  • La Gare
  • La Magdeleine
  • La Roche Village
  • La Rochette
  • La Ruine
  • La Tartarasse
  • La chapelle
  • Le Plan
  • Le Poët
  • Le Rif
  • Le Sarret
  • Le Lac
  • Les Allouviers
  • Les Bellons
  • Les Eyssalarettes
  • Les Fangeas
  • Les Ribes
  • Les Viollins
  • Mairie
  • Maison Planche
  • Maison de l'Artisanat
  • Maison du Parc - Chalet nordique
  • Pied de Parcher
  • Parking Dormillouse
  • Parking de Fontumberge
  • Parking des Sagnes
  • Le Quartz Piscine
  • Place du Puy
  • Plan Léothaud
  • Pont de Pallon
  • Pont de l'Ascension
  • Pra Reboul
  • Prelles
  • Prey d'Aval
  • Pré Sabeyran
  • Pré de Madame Carle
  • Queyrières
  • Giratoire de la gare
  • Route Domaine
  • Récoumère 1800
  • Saint Romain
  • Ecole St Antoine
  • St Martin Village
  • Place des Prés
  • Station 1400 Saint Roch
  • Station 1600 Clot Péouilloux
  • Station Pelvoux
  • Tunnel des Claux
  • Vallouise Centre
  • ZA Les Sablonnières

Over time

This is the first scorecard for this agency. A trend and a "what changed" summary appear here once it has been checked more than once.

Everything we checked

17 findings, ordered by severity.

Show every finding
  • Warning717 instances

    Missing timepoint value (flagged by the MobilityData validator).

    See the linked rule for what this affects.

    Fix: Review the rule documentation for 'missing_timepoint_value' at https://gtfs-validator.mobilitydata.org/rules.html and check the flagged rows in your feed. (Varies.)

    Validator rule: missing_timepoint_value · Read the fix guide · See MobilityData GTFS Validator rules

  • Warning172 instances

    Some internal IDs use characters outside the basic text set.

    These IDs are valid UTF-8 data. This warning is only about support in older apps. It does not mean that names in other languages are wrong.

    Fix: Only change the flagged IDs if an app needs basic ASCII values. Update each place that uses the ID. Keep all names and headsigns in their original language. (A planned ID change, not a quick text cleanup.)

    Validator rule: non_ascii_or_non_printable_char · See MobilityData GTFS Validator rules

  • Warning75 instances

    75 of 75 trips don't say whether the vehicle is wheelchair accessible.

    Even with accessible stops, riders need to know the bus itself can take them.

    Fix: Set wheelchair_accessible on every trip. If every vehicle is accessible, this may be one default; otherwise use the value for each trip. (A default or per-trip field in your export.)

    Validator rule: scorecard_wheelchair_accessible_unknown · Read the fix guide · See GTFS Schedule reference

  • Warning66 instances

    66 of 75 trips have no headsign.

    Riders at the stop can't tell which direction a bus is going.

    Fix: Populate trip_headsign to match what the bus displays. (Usually a bulk edit in your scheduling software.)

    Validator rule: scorecard_missing_headsigns · Read the fix guide · See GTFS Best Practices

  • Warning65 instances

    65 of 65 stops don't say whether a wheelchair user can board there.

    Riders who use wheelchairs can't plan a trip when accessibility is marked 'unknown'; apps show no information at all.

    Fix: Set wheelchair_boarding to 1 (accessible) or 2 (not accessible) for every stop. A field survey can start with the busiest stops. (A column in stops.txt; your scheduling software likely has it.)

    Validator rule: scorecard_wheelchair_boarding_unknown · Read the fix guide · See GTFS Schedule reference

  • Warning25 instances

    Some rider-facing names are in ALL CAPS or all lowercase.

    ALL-CAPS stop and headsign names are harder to read in apps and are read awkwardly by screen readers.

    Fix: Use mixed case for stop names and headsigns (e.g. 'Main St & 2nd Ave', not 'MAIN ST & 2ND AVE'). (Often a bulk fix in your scheduling software.)

    Validator rule: mixed_case_recommended_field · Read the fix guide · See MobilityData GTFS Validator rules

  • Warning21 instances

    Some stops exist in the feed but no trip ever stops at them.

    Riders may walk to a stop where no bus is scheduled to arrive.

    Fix: Remove retired stops from the export, or add them back to the trips that should serve them. (A review pass in your scheduling software.)

    Validator rule: stop_without_stop_time · Read the fix guide · See MobilityData GTFS Validator rules

  • Warning5 instances

    Some service calendars in the feed have already ended.

    Expired calendars are dead weight and can hide real schedule problems from your staff and vendors.

    Fix: Remove past service periods the next time you export the feed. (One setting in most export tools.)

    Validator rule: expired_calendar · Read the fix guide · See MobilityData GTFS Validator rules

  • Warning4 instances

    Some files leave out fields that GTFS asks for but does not require.

    Recommended fields like agency_phone or stop descriptions make the feed more useful to riders and trip planners.

    Fix: Review the flagged fields and fill in the ones your riders would use. (A field at a time; not urgent.)

    Validator rule: missing_recommended_field · Read the fix guide · See MobilityData GTFS Validator rules

  • Warning1 instance

    A file GTFS asks for (usually feed_info.txt) is missing.

    feed_info.txt tells apps who publishes the feed and when it expires; without it nobody is warned before data goes stale.

    Fix: Add feed_info.txt with publisher name, URL, language, and feed_start_date/feed_end_date. (One small file, set once in export settings.)

    Validator rule: missing_recommended_file · Read the fix guide · See MobilityData GTFS Validator rules

  • Warning1 instance

    Some route long names repeat the route's short name inside them.

    Apps show both names together, so riders see the number twice, like '5 5 Downtown'.

    Fix: Drop the short name from route_long_name and keep the long name descriptive, like 'Downtown via 5th Ave'. (One field per flagged route.)

    Validator rule: route_long_name_contains_short_name · See MobilityData GTFS Validator rules

  • Warning1 instance

    feed_info.txt is missing its start/end dates (the file itself is absent)

    Apps and this scorecard can't warn anyone before the feed goes stale without stated validity dates.

    Fix: Add feed_info.txt with feed_start_date and feed_end_date to your export. (Two fields, set once in export settings.)

    Validator rule: scorecard_missing_feed_info_dates · Read the fix guide · See MobilityData GTFS Validator rules

  • Warning1 instance

    The feed contains no fare information.

    Riders see 'fare unknown' in trip planners and can't budget their trip; visitors are most affected.

    Fix: Add fare_attributes.txt (or Fares v2 files) with your fare structure. If your service is fare-free, ask to have it marked fare-free instead. (A small file for most flat-fare systems.)

    Validator rule: scorecard_no_fare_data · Read the fix guide · See GTFS Best Practices

  • Info75 instances

    Trip with shape dist traveled but no shape distances (flagged by the MobilityData validator).

    See the linked rule for what this affects.

    Fix: Review the rule documentation for 'trip_with_shape_dist_traveled_but_no_shape_distances' at https://gtfs-validator.mobilitydata.org/rules.html and check the flagged rows in your feed. (Varies.)

    Validator rule: trip_with_shape_dist_traveled_but_no_shape_distances · See MobilityData GTFS Validator rules

  • Info4 instances

    The feed has a stretch of two weeks or more with no service running.

    A long gap can mean dates were left out of the calendar. Apps then show no trips on those days.

    Fix: Check whether the gap is real, like a seasonal break; if not, add the missing dates to the calendar. (A review of your calendar dates.)

    Validator rule: big_gap_in_service · Read the fix guide · See MobilityData GTFS Validator rules

  • Info1 instance

    Some files contain columns that are not part of the GTFS spec.

    Harmless to riders, but apps ignore these columns and they can hide typos in real column names.

    Fix: Check the flagged column names for misspellings of standard GTFS fields; remove them if they are vendor extras. (A quick look at the flagged files.)

    Validator rule: unknown_column · Read the fix guide · See MobilityData GTFS Validator rules

  • Info1 instance

    feed_info.txt has no technical contact (feed_contact_email or feed_contact_url).

    Trip-planning apps and regional data coordinators have nobody to email when they spot a problem with your feed, so problems linger.

    Fix: Add feed_contact_email to feed_info.txt. (One field.)

    Validator rule: scorecard_no_feed_contact · Read the fix guide · See MobilityData GTFS Validator rules

Conformance mark Not yet

This feed is close to the conformance mark. States wheelchair access on 0% of stops and 0% of trips; the mark needs 90% of each.

Valid Met
Passes validation with no errors.
Current Met
Service data covers the next 160 days.
Accessible Not yet
States wheelchair access on 0% of stops and 0% of trips; the mark needs 90% of each.

In plain words: earn this mark when your feed passes validation, has not expired, and says whether nearly every stop and trip is wheelchair accessible.

A pass credential for a feed that is valid, current, and states wheelchair access on nearly every stop and trip. Accessibility here measures what the feed publishes, not whether a stop is physically usable. How the conformance mark works.

Can riders use it?

Checks beyond structural validation: places where the feed is valid but a rider still could not travel.

  • 21 of 65 boardable stops are never served by any trip. Riders see these stops in apps and on the map but can never catch anything there, which erodes trust in the data. Remove stops no route serves, or add the trips that should call at them.

These do not change the grade. They catch trips with no rideable leg and stops no trip serves, the kind of gap a trip planner trips over.

Clears the Google and Apple Maps four-week coverage bar. This feed has 160 days of service ahead, clearing the four-week (28-day) window Maps asks for. No validator errors either, so riders keep seeing this agency in their trip planners; warnings lower the grade here but do not remove a feed from Maps.

How this agency maps to the standards

The scorecard is a data-quality lens, not a compliance determination. Its universal references describe good GTFS and useful rider information. Useful references here are GTFS Schedule Best Practices, GTFS-Realtime Best Practices, MobilityData grading scheme, Google Transit publication guidance. Read the full standards crosswalk.

Correctness 54 / 100
GTFS Schedule best practices, checked by the MobilityData validator. MobilityData grading covers stop locations, route names, and colors. Google Transit requires a feed to pass validation for publication.
Freshness 85 / 100
GTFS Schedule best practices call for a dataset that stays current. An expired calendar can remove service from Google Transit and other rider trip planners.
Rider experience 24 / 100
GTFS Best Practices for rider-facing fields. MobilityData grading covers stop names and headsigns.
Realtime quality Not yet published
GTFS-Realtime best practices: a stable URL, high uptime, and frequent updates.

Show your grade

Put a badge on your agency site or feed README. It updates after each completed scoring check and links back to this scorecard.

Réseau urbain Pays des Ecrins GTFS data quality grade: F

Prefer a shields.io style? Point a dynamic endpoint badge at the published badge.json.

Cite this record

This page updates on every check. The record below does not: it is the dated file this grade came from, published at https://gtfsscorecard.org/data/artifacts/fr-pan-83467/2026-07-24.json and never overwritten, pinning the grade, category scores, rubric version, validator version, reader archive profile, and the scored feed's sha256 as they stood on 2026-07-24. Use it in a board packet, a regulatory filing, or a research citation instead of linking the live page, whose content will differ on your next visit.

Citing the tool itself rather than one agency's record? Use the repo's CITATION.cff.