Prep for a call: printable one-page brief · For your board packet: printable one-pager · Compare with another agency · Watch this feed: get an email before it expires
Feed status · checked 2026-07-09
Everett Transit
Based on the feed this agency publishes
down 0.4 since 2026-07-08
Ahead of 63% of all tracked agencies and 62% of mid-size agencies. Operates in Washington.
A data-quality and completeness lens to help an agency improve its GTFS feed. Not an official compliance determination from any transit program. New to this? How to read your scorecard. Interactive view of this scorecard. Rubric v1.1, validator 8.0.1.
Checked for changes 19 hours ago; last changed 17 days ago.
Top things to fix
Set wheelchair_accessible on every trip (most small-agency fleets are 100% accessible, so this is often a single default).Likely your export tool
1098 of 1098 trips don't say whether the vehicle is wheelchair accessible. Even with accessible stops, riders need to know the bus itself can take them.
⏱ Often one default setting in your export.worth about +15 points
Agencies here usually clear this within about 1 week (based on 5 observed fixes).
Populate trip_headsign to match what the bus displays.Likely your export tool
1098 of 1098 trips have no headsign. Riders at the stop can't tell which direction a bus is going.
⏱ Usually a bulk edit in your scheduling software.worth about +15 points
Add fare_attributes.txt (or Fares v2 files) with your fare structure. If your service is fare-free, ask to have it marked fare-free instead.
The feed contains no fare information. Riders see 'fare unknown' in trip planners and can't budget their trip; visitors are most affected.
⏱ A small file for most flat-fare systems.worth about +15 points
Close the loop on each fix. Read the guide, make the change in your tool, and let the next run verify it — the scorecard shows the fix; the agency publishes it.
Set wheelchair_accessible on every trip (most small-agency fleets are 100% accessible, so this is often a single default). · Read the fix guide
Make the change. Make this change in whatever tool produces your feed, then re-export.
Prove it cleared. The next scorecard run re-checks this automatically and, once it is gone, mints a dated receipt. Self-check a feed before you publish.
Populate trip_headsign to match what the bus displays. · Read the fix guide
Make the change. Make this change in whatever tool produces your feed, then re-export.
Prove it cleared. The next scorecard run re-checks this automatically and, once it is gone, mints a dated receipt. Self-check a feed before you publish.
Add fare_attributes.txt (or Fares v2 files) with your fare structure. If your service is fare-free, ask to have it marked fare-free instead. · Read the fix guide
Make the change. Make this change in whatever tool produces your feed, then re-export.
Prove it cleared. The next scorecard run re-checks this automatically and, once it is gone, mints a dated receipt. Self-check a feed before you publish.
Send your vendor a fix request
You may not control the GTFS export yourself. Copy this and send it to whoever runs your scheduling software export. It names each fix with the validator notice and a guide link.
Score by category
The MobilityData validator flagged 4 kinds of issue across 503 instances (0 error, 498 warning, 5 informational).
Service data covers the next 58 days.
100% of stops state wheelchair accessibility (0% marked accessible, 100% marked not accessible). This measures what the feed publishes, not whether a stop is physically usable. Fare data is not published.
100% of stops state accessibility (0% marked accessible). Reflects what the feed states, not verified physical usability.
This agency publishes realtime, but the feed needs an access key we don't have yet. Nothing here counts against the grade.
Over time
Overall score across the last 20 checks — down 0.4 since 2026-07-08.
Show the numbers
| Check | Score | Change |
|---|---|---|
| 2026-06-19 | 72.5 | first check |
| 2026-06-20 | 72.5 | no change |
| 2026-06-21 | 72.5 | no change |
| 2026-06-22 | 72.5 | no change |
| 2026-06-23 | 72.5 | no change |
| 2026-06-24 | 72.5 | no change |
| 2026-06-25 | 72.5 | no change |
| 2026-06-26 | 72.5 | no change |
| 2026-06-27 | 72.5 | no change |
| 2026-06-28 | 72.5 | no change |
| 2026-06-29 | 72.5 | no change |
| 2026-06-30 | 72.5 | no change |
| 2026-07-01 | 72.5 | no change |
| 2026-07-02 | 72.5 | no change |
| 2026-07-04 | 72.5 | no change |
| 2026-07-05 | 72.5 | no change |
| 2026-07-06 | 72.5 | no change |
| 2026-07-07 | 72.5 | no change |
| 2026-07-08 | 72.1 | down 0.4 |
| 2026-07-09 | 71.7 | down 0.4 |
What changed since your last check
- Correctness no change
- Freshness down 1.6
- Rider experience no change
What changed in this feed
Overall score fell 0.4 points since 2026-07-08.
Same feed file as 2026-07-08; the published zip did not change.
Subscribe to this feed’s changes (Atom) to hear about grade drops in a reader, with no sign-up.
Everything we checked
- Warning1098 instances
1098 of 1098 trips don't say whether the vehicle is wheelchair accessible.
Even with accessible stops, riders need to know the bus itself can take them.
Fix: Set wheelchair_accessible on every trip (most small-agency fleets are 100% accessible, so this is often a single default). (Often one default setting in your export.)
Agencies here usually clear this within about 1 week (based on 5 observed fixes).
Validator rule: scorecard_wheelchair_accessible_unknown · Read the fix guide · See GTFS Schedule reference (opens the GTFS Schedule reference on an external site)
- Warning1098 instances
1098 of 1098 trips have no headsign.
Riders at the stop can't tell which direction a bus is going.
Fix: Populate trip_headsign to match what the bus displays. (Usually a bulk edit in your scheduling software.)
Validator rule: scorecard_missing_headsigns · Read the fix guide · See GTFS Best Practices (opens GTFS Best Practices on an external site)
- Warning495 instances
Some rider-facing names are in ALL CAPS or all lowercase.
ALL-CAPS stop and headsign names are harder to read in apps and are read awkwardly by screen readers.
Fix: Use mixed case for stop names and headsigns (e.g. 'Main St & 2nd Ave', not 'MAIN ST & 2ND AVE'). (Often a bulk fix in your scheduling software.)
Validator rule: mixed_case_recommended_field · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Warning2 instances
Some stops exist in the feed but no trip ever stops at them.
Riders may walk to a stop where no bus is scheduled to arrive.
Fix: Remove retired stops from the export, or add them back to the trips that should serve them. (A review pass in your scheduling software.)
Agencies here usually clear this within about 1 week (based on 11 observed fixes).
Validator rule: stop_without_stop_time · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Warning1 instance
Missing feed contact email and url (flagged by the MobilityData validator).
See the linked rule for what this affects.
Fix: Review the rule documentation for 'missing_feed_contact_email_and_url' at https://gtfs-validator.mobilitydata.org/rules.html and check the flagged rows in your feed. (Varies.)
Agencies here usually clear this within about 1 week (based on 6 observed fixes).
Validator rule: missing_feed_contact_email_and_url · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Warning1 instance
The feed contains no fare information.
Riders see 'fare unknown' in trip planners and can't budget their trip; visitors are most affected.
Fix: Add fare_attributes.txt (or Fares v2 files) with your fare structure. If your service is fare-free, ask to have it marked fare-free instead. (A small file for most flat-fare systems.)
Validator rule: scorecard_no_fare_data · Read the fix guide · See GTFS Best Practices (opens GTFS Best Practices on an external site)
- Info410 instances
About 410 stop names are written in ALL CAPS.
Mixed-case names are easier to read in apps and are read more naturally by screen readers.
Fix: Rename stops to mixed case (e.g. 'Main St & 2nd Ave'). (Often a bulk fix in your scheduling software.)
Validator rule: scorecard_stop_names_all_caps · Read the fix guide · See GTFS Best Practices (opens GTFS Best Practices on an external site)
- Info5 instances
Some files contain columns that are not part of the GTFS spec.
Harmless to riders, but apps ignore these columns and they can hide typos in real column names.
Fix: Check the flagged column names for misspellings of standard GTFS fields; remove them if they are vendor extras. (A quick look at the flagged files.)
Validator rule: unknown_column · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Info1 instance
feed_info.txt has no technical contact (feed_contact_email or feed_contact_url).
App makers and state data programs have nobody to email when they spot a problem with your feed, so problems linger.
Fix: Add feed_contact_email to feed_info.txt. (One field.)
Agencies here usually clear this within about 1 week (based on 10 observed fixes).
Validator rule: scorecard_no_feed_contact · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
Beyond the grade
Opportunities that do not change your grade today: fare detail, on-demand service, and deeper accessibility data.
478 stop name(s) use abbreviations or symbols a screen reader may mispronounce, with no spoken form set ("MERRILL CREEK PKWY & 13TH AVE W - EB", "WALNUT ST & 19TH ST - SB", "WALNUT ST & LEONARD DR - SB", and more).
Consider: Add tts_stop_name with the spoken form, e.g. 'Main Street and Second Avenue', for the affected stops.
Some fixes we can make for you
These are the safe mechanical fixes, applied to a copy of your feed. They change only what is certain and leave everything else untouched. Review the diff before you publish.
Recased shouting stop names 410 changes
For example: MERRILL CREEK PKWY & 13TH AVE W - EB -> Merrill Creek Pkwy & 13th Ave W - Eb
NTD certification readiness Ready
Published at a public URL, valid, and current: the three things the NTD GTFS requirement asks of a feed all hold here. Only your own D-10 certification makes that official; this is a heads-up, not a determination.
- Published Ready
- Published at a public URL.
- Valid Ready
- Passes validation with no errors.
- Current Ready
- Service data covers the next 58 days.
- agency_id matches your NTD ID Not checked yet
- Setting your GTFS agency_id to your five-digit NTD ID is an optional way to line a feed up with its National Transit Database record. FTA links the two on your P-50 form, so it is not a required feed change. We don't have your NTD ID on file, so this is not checked yet.
In plain words: if you report to the federal transit database, you have to publish a working, up-to-date feed and confirm it once a year. This box is a heads-up on whether yours looks ready; it is not the official sign-off.
A readiness signal mapping this feed to the FTA National Transit Database GTFS requirement (Report Year 2023 onward: a public, valid, current feed, certified annually on the D-10). Aligning agency_id with your NTD ID lets the feed line up with your NTD record; the July 2025 final rule links the two on the P-50 form rather than requiring that feed change, and requires shapes.txt in the published GTFS: Full Reporters from Report Year 2025, and Reduced, Rural, and Tribal Reporters from Report Year 2026. Not an official determination; your certification is the official check.
Conformance mark Not yet
This feed is close to the conformance mark. States wheelchair access on 100% of stops and 0% of trips; the mark needs 90% of each.
- Valid Met
- Passes validation with no errors.
- Current Met
- Service data covers the next 58 days.
- Accessible Not yet
- States wheelchair access on 100% of stops and 0% of trips; the mark needs 90% of each.
In plain words: earn this mark when your feed passes validation, has not expired, and says whether nearly every stop and trip is wheelchair accessible.
A pass credential for a feed that is valid, current, and states wheelchair access on nearly every stop and trip. Accessibility here measures what the feed publishes, not whether a stop is physically usable. How the conformance mark works.
Can riders use it?
Checks beyond structural validation: places where the feed is valid but a rider still could not travel.
- 2 of 498 boardable stops are never served by any trip. Riders see these stops in apps and on the map but can never catch anything there, which erodes trust in the data. Remove stops no route serves, or add the trips that should call at them.
These do not change the grade. They catch trips with no rideable leg and stops no trip serves, the kind of gap a trip planner trips over.
Clears the Google and Apple Maps four-week coverage bar. This feed has 58 days of service ahead, clearing the four-week (28-day) window Maps asks for. No validator errors either, so riders keep seeing this agency in their trip planners; warnings lower the grade here but do not remove a feed from Maps.
How this agency maps to the standards
A data-quality lens, not a compliance determination. Each category shows this feed's score and the standards it relates to: the FTA National Transit Database GTFS requirement, the MobilityData grading scheme, and the Google Transit gate. Read the full standards crosswalk.
Your state runs a transit-data program that can help: WSDOT Transportation Data. WSDOT builds and publishes GTFS for Washington transit agencies. Your state publishes no quality rubric of its own, so the closest published bars a program can hold this feed to are the federal and industry ones below; the score maps to those.
- Correctness 84 / 100
- GTFS Schedule best practices, checked by the MobilityData validator. MobilityData grading: stop locations, route names and colors. Google Transit: a feed must pass validation to stay in Maps.
- Freshness 97 / 100
- The FTA National Transit Database expectation of a valid, current feed. Google Transit: an expired calendar drops the agency from Maps.
- Rider experience 35 / 100
- GTFS Best Practices for rider-facing fields. MobilityData grading: stop names and headsigns.
- Realtime quality Not yet published
- GTFS-Realtime best practices: a stable URL, high uptime, and frequent updates.
Show your grade
Put a live badge on your agency site or feed README. It updates daily and links back to this scorecard.
Prefer a shields.io style? Point a dynamic endpoint badge at the published badge.json.
Cite this record
This page updates on every check. The record below does not: it is the dated file this grade came from, published at https://gtfsscorecard.org/data/artifacts/everett-transit/2026-07-09.json and never overwritten, pinning the grade, category scores, rubric version, validator version, and the scored feed's sha256 as they stood on 2026-07-09. Use it in a board packet, an NTD narrative, or a research citation instead of linking the live page, whose content will differ on your next visit.
Citing the tool itself rather than one agency's record? Use the repo's CITATION.cff.