Feed status · checked 2026-08-02
BurbankBus
Based on the feed this agency publishes
Service mode Bus
unchanged since 2026-08-01
A data-quality and completeness lens to help an agency improve its GTFS feed. Not an official compliance determination from any transit program. New to this? How to read your scorecard. Interactive view of this scorecard. Rubric v1.3, validator 8.0.1.
Checked for changes 3 hours ago; last changed 8 hours ago.
Measured 3 of 4 score categories from the agency's own feed.
How we measured this
Confidence in this measurement: medium.
- Realtime quality was not measured this run. It does not count against the grade.
- The feed was downloaded from the agency's own URL.
Confidence describes how much the pipeline could measure this run, not the feed itself. It never changes the grade.
Top things to fix
Re-generate shape distances in your export; flag to your vendor if it persists.Likely your export tool
Some trips have stop times whose distances along the route go backwards. Apps can show buses jumping backwards or mis-order stops.
⏱ Usually an export-tool fix, not hand editing.worth about +18 points in its category
Set wheelchair_boarding to 1 (accessible) or 2 (not accessible) for every stop. A field survey can start with the busiest stops.Likely your team
47 of 47 stops don't say whether a wheelchair user can board there. Riders who use wheelchairs can't plan a trip when accessibility is marked 'unknown'; apps show no information at all.
⏱ A column in stops.txt; your scheduling software likely has it.worth about +25 points in its category
Set wheelchair_accessible on every trip. If every vehicle is accessible, this may be one default; otherwise use the value for each trip.Likely your export tool
99 of 99 trips don't say whether the vehicle is wheelchair accessible. Even with accessible stops, riders need to know the bus itself can take them.
⏱ A default or per-trip field in your export.worth about +15 points in its category
Finding handoff
Move one finding to a recheck
Select one finding. Copy the request, make the change in the feed-producing tool, then compare the next complete run.
- Feed evidence
- Some trips have stop times whose distances along the route go backwards.
- Next action
- Re-generate shape distances in your export; flag to your vendor if it persists.
- Recheck
- Publish the changed feed at the same URL. On the next complete, comparable scorecard run, confirm that this finding is no longer reported.
Copy handoff text
- Feed evidence
- 47 of 47 stops don't say whether a wheelchair user can board there.
- Next action
- Set wheelchair_boarding to 1 (accessible) or 2 (not accessible) for every stop. A field survey can start with the busiest stops.
- Recheck
- Publish the changed feed at the same URL. On the next complete, comparable scorecard run, confirm that this finding is no longer reported.
Copy handoff text
- Feed evidence
- 99 of 99 trips don't say whether the vehicle is wheelchair accessible.
- Next action
- Set wheelchair_accessible on every trip. If every vehicle is accessible, this may be one default; otherwise use the value for each trip.
- Recheck
- Publish the changed feed at the same URL. On the next complete, comparable scorecard run, confirm that this finding is no longer reported.
Copy handoff text
How to make and check these changes
Check the result on the published feed. Read the guide, make the change in your tool, and use the next comparable run to see whether the finding is still reported. Only an action or ticket record can attribute who made the change.
Re-generate shape distances in your export; flag to your vendor if it persists.
Make the change. Make this change in whatever tool produces your feed, then re-export.
Check the result. The next scorecard run checks this finding again. If a comparable check no longer reports it, the feed's clearance log records that result. This confirms feed state, not who made the change. See this feed's finding-clearance log.
Set wheelchair_boarding to 1 (accessible) or 2 (not accessible) for every stop. A field survey can start with the busiest stops. · Read the fix guide
Make the change. Make this change in whatever tool produces your feed, then re-export.
Check the result. The next scorecard run checks this finding again. If a comparable check no longer reports it, the feed's clearance log records that result. This confirms feed state, not who made the change. See this feed's finding-clearance log.
Set wheelchair_accessible on every trip. If every vehicle is accessible, this may be one default; otherwise use the value for each trip. · Read the fix guide
Make the change. Make this change in whatever tool produces your feed, then re-export.
Check the result. The next scorecard run checks this finding again. If a comparable check no longer reports it, the feed's clearance log records that result. This confirms feed state, not who made the change. See this feed's finding-clearance log.
Rider view: what this feed publishes
A quick read of rider-facing information in this feed.
- Schedule visibility
- The feed states that service is published through 2099-12-31. This may be intentional or a placeholder; confirm current service with the transit operator.
- Published accessibility data
- Accessibility information is stated for 0% of stops and 0% of trips. This measures published data, not whether stops or vehicles are physically usable.
- Fare information
- No fare information is published in the feed.
- Realtime information
- Realtime-feed availability and live-arrival coverage are not known from this scorecard.
Important: This does not rate service reliability. Riders should confirm current service alerts, fares, and accessibility accommodations with the transit operator before traveling.
Send your vendor a fix request
You may not control the GTFS export yourself. Copy this and send it to whoever runs your scheduling software export. It names each fix with the validator notice and a guide link.
Score by category
The MobilityData validator flagged 9 kinds of issue across 84 instances (48 error, 32 warning, 4 informational).
Service is published through 2099-12-31. It may be intentional, but confirm the end date before treating the feed as maintained.
0% of stops state wheelchair accessibility (0% marked accessible, 0% marked not accessible). This measures what the feed publishes, not whether a stop is physically usable. Fare data is not published.
0% of stops state accessibility (0% marked accessible). Reflects what the feed states, not verified physical usability.
2 accessibility depth signals
2 route badge(s) pair a color and text color below the WCAG 4.5:1 contrast bar (P, O).
Consider: Adjust route_color or route_text_color so each pair clears 4.5:1. Often switching the text between black and white is enough.
42 stop name(s) use abbreviations or symbols a screen reader may mispronounce, with no spoken form set ("Empire & Ontario", "Ontario & Thornton", "Olive & Lake SB", and more).
Consider: Add tts_stop_name with the spoken form, e.g. 'Main Street and Second Avenue', for the affected stops.
Opportunities to strengthen the data, not deductions from the sub-score above. States what the second accessibility lens can check from the feed, not verified physical usability.
Not scored yet. Nothing here counts against the grade.
Routes and stops
Each route is drawn once, using the longest shape its trips follow; stops are the dots.
This feed has 47 stops.
The route and stop data is ready below. Load the map only when you want the geographic view. It uses additional data.
Basemap: OpenFreeMap, © OpenStreetMap contributors. Routes and stops: this agency's GTFS feed.
- P (pink)
- O (orange)
| Route | Type | Line color |
|---|---|---|
| P P - Pink Route | Bus | pink |
| O O - North Hollywood to Airport | Bus | orange |
List every stop
- Metrolink Station
- Empire and Niagara
- Empire & Ontario
- Ontario & Thornton
- Olive & Lake SB
- Olive & Victory SB
- Olive & Joslyn Center
- Olive & Verdugo
- Olive & Keystone SB
- Buena Vista & Olive SB
- Buena Vista & Alameda SB
- Alameda & Bob Hope SB
- Olive & Cailfornia
- Olive & Hollywood Way
- Buena Vista & Alameda NB
- Buena Vista & Olive NB
- Olive & Keystone NB
- Olive & Verdugo NB
- Olive & Virginia
- Olive & Victory NB
- Olive & Lake NB
- NoHo Station
- Burbank & Whitehall
- Burbank & Pass
- Burbank & Fairview
- Burbank & Florence
- Burbank & Buena Vista
- Buena Vista & Victory
- Buena Vista & Pacific
- Empire & Buena Vista
- Hollywood Burbank Airport RITC
- Hollywood & Valhalla
- Hollywood & Pacific
- Hollywood & Victory
- Hollywood & Jeffries
- Hollywood & Burbank
- Burbank & Maple
- Burbank & Clybourn
- Burbank & Hollywood
- Riverside & Pass
- Riverside & Mariota
- Universal Redline Station
- Riverside & Mariota
- Riverside & Pass
- Hollywood & Olive EB
- Olive & California EB
- Alameda & Bob Hope EB
Over time
Overall score across the last 4 checks — unchanged since 2026-08-01.
Show the numbers
| Check | Score | Change |
|---|---|---|
| 2026-07-25 | 59.4 | first check |
| 2026-07-30 | 59.4 | no change |
| 2026-08-01 | 59.4 | no change |
| 2026-08-02 | 59.4 | no change |
What changed since your last check
- Correctness no change
- Freshness no change
- Rider experience no change
What changed in this feed
Overall grade and score held steady since 2026-08-01.
The feed file was re-published since 2026-08-01.
Subscribe to this feed’s changes (Atom) to hear about grade drops in a reader, with no sign-up.
Everything we checked
13 findings, ordered by severity.
Show every finding
- Error48 instances
Some trips have stop times whose distances along the route go backwards.
Apps can show buses jumping backwards or mis-order stops.
Fix: Re-generate shape distances in your export; flag to your vendor if it persists. (Usually an export-tool fix, not hand editing.)
Finding code: decreasing_or_equal_stop_time_distance · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Warning99 instances
99 of 99 trips don't say whether the vehicle is wheelchair accessible.
Even with accessible stops, riders need to know the bus itself can take them.
Fix: Set wheelchair_accessible on every trip. If every vehicle is accessible, this may be one default; otherwise use the value for each trip. (A default or per-trip field in your export.)
Finding code: scorecard_wheelchair_accessible_unknown · Read the fix guide · See GTFS Schedule reference (opens the GTFS Schedule reference on an external site)
- Warning47 instances
47 of 47 stops don't say whether a wheelchair user can board there.
Riders who use wheelchairs can't plan a trip when accessibility is marked 'unknown'; apps show no information at all.
Fix: Set wheelchair_boarding to 1 (accessible) or 2 (not accessible) for every stop. A field survey can start with the busiest stops. (A column in stops.txt; your scheduling software likely has it.)
Finding code: scorecard_wheelchair_boarding_unknown · Read the fix guide · See GTFS Schedule reference (opens the GTFS Schedule reference on an external site)
- Warning26 instances
Some stops sit far from the route line, going by the feed's own distance values.
Trip planners may draw the route down the wrong streets or point riders to the wrong corner.
Fix: Check the flagged stops' shape_dist_traveled against the route shape, and re-generate it on export if they disagree. (Usually an export-tool fix, not hand editing.)
Finding code: stop_too_far_from_shape_using_user_distance · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Warning2 instances
Some route long names repeat the route's short name inside them.
Apps show both names together, so riders see the number twice, like '5 5 Downtown'.
Fix: Drop the short name from route_long_name and keep the long name descriptive, like 'Downtown via 5th Ave'. (One field per flagged route.)
Finding code: route_long_name_contains_short_name · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Warning1 instance
feed_info.txt does not state when this feed starts and ends.
Without stated dates, apps can't warn anyone before your data goes stale; it just disappears one day.
Fix: Fill in feed_start_date and feed_end_date in feed_info.txt. (Two fields, likely set once in your export settings.)
Finding code: missing_feed_info_date · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Warning1 instance
Some files leave out fields that GTFS asks for but does not require.
Recommended fields like agency_phone or stop descriptions make the feed more useful to riders and trip planners.
Fix: Review the flagged fields and fill in the ones your riders would use. (A field at a time; not urgent.)
Finding code: missing_recommended_field · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Warning1 instance
Same name and description for route (flagged by the MobilityData validator).
See the linked rule for what this affects.
Fix: Review the rule documentation for 'same_name_and_description_for_route' at https://gtfs-validator.mobilitydata.org/rules.html and check the flagged rows in your feed. (Varies.)
Finding code: same_name_and_description_for_route · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Warning1 instance
On some trips the stops fall along the route line in a different order than the schedule lists.
Trip planners can draw the bus doubling back or skipping ahead, which confuses riders reading the map.
Fix: Check the stop order and the shape direction in your scheduling software; the shape is often drawn backwards. (A few minutes per flagged trip.)
Finding code: stops_match_shape_out_of_order · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Warning1 instance
feed_info.txt is missing its start/end dates
Apps and this scorecard can't warn anyone before the feed goes stale without stated validity dates.
Fix: Add feed_info.txt with feed_start_date and feed_end_date to your export. (Two fields, set once in export settings.)
Finding code: scorecard_missing_feed_info_dates · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Warning1 instance
The feed contains no fare information.
Riders see 'fare unknown' in trip planners and can't budget their trip; visitors are most affected.
Fix: Add fare_attributes.txt (or Fares v2 files) with your fare structure. If your service is fare-free, ask to have it marked fare-free instead. (A small file for most flat-fare systems.)
Finding code: scorecard_no_fare_data · Read the fix guide · See GTFS Best Practices (opens GTFS Best Practices on an external site)
- Info3 instances
The feed includes a file that is not part of the GTFS spec.
Apps ignore files they don't know, and a stray file can hide a misspelled standard file name.
Fix: Check the flagged file name for a typo of a standard GTFS file. Remove it if it is a vendor extra. (A quick look at the flagged file.)
Finding code: unknown_file · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Info1 instance
Service extends far in the future (flagged by the MobilityData validator).
See the linked rule for what this affects.
Fix: Review the rule documentation for 'service_extends_far_in_the_future' at https://gtfs-validator.mobilitydata.org/rules.html and check the flagged rows in your feed. (Varies.)
Finding code: service_extends_far_in_the_future · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
NTD GTFS readiness Needs attention
This feed is close to NTD-ready. 1 validator error to resolve.
- Published Ready
- Published at a public URL.
- Valid Needs attention
- 1 validator error to resolve.
- Current Ready
- The published window is current, but its service end date is unusually distant; confirm that date is intentional.
- agency_id provided Ready
- agency.txt provides agency_id. For RY2026, keep one stable value for each NTD reporter represented in the feed and crosswalk each value on the P-50 form.
- agency_id equals your NTD ID (optional) Not checked yet
- This feed provides agency_id. For RY2026, keep one stable value for each NTD reporter represented in the feed and crosswalk it on the P-50 form. The value does not need to equal the five-digit NTD ID; we do not have that ID on file, so the optional equality comparison is not checked yet.
- shapes.txt covers your trips Ready
- All 99 trips have a shape in shapes.txt.
In plain words: if you report to the federal transit database, you have to publish a working, up-to-date feed, provide a stable agency_id for each represented reporter, and confirm the feed and P-50 crosswalk each year. This box is a heads-up; your filings are the official check.
A readiness signal mapping this feed to the FTA National Transit Database GTFS requirement (Report Year 2023 onward: a public, valid, current feed, certified annually on the D-10). For RY2026, each represented reporter needs a stable agency_id, unique within the feed and crosswalked to its five-digit NTD ID on P-50; the values do not need to be equal. FTA also requires shapes.txt in the published GTFS: Full Reporters from Report Year 2025, and Reduced, Rural, and Tribal Reporters from Report Year 2026. Not an official determination; your certification is the official check.
Conformance mark Not yet
This feed is close to the conformance mark. 1 validator error to resolve. States wheelchair access on 0% of stops and 0% of trips; the mark needs 90% of each.
- Valid Not yet
- 1 validator error to resolve.
- Current Met
- The published window is current, but its service end date is unusually distant; confirm that date is intentional.
- Accessible Not yet
- States wheelchair access on 0% of stops and 0% of trips; the mark needs 90% of each.
In plain words: earn this mark when your feed passes validation, has not expired, and says whether nearly every stop and trip is wheelchair accessible.
A pass credential for a feed that is valid, current, and states wheelchair access on nearly every stop and trip. Accessibility here measures what the feed publishes, not whether a stop is physically usable. How the conformance mark works.
Clears the Google and Apple Maps four-week coverage bar. This feed clears the four-week coverage window, but its service end date is unusually distant. Confirm that date is intentional before treating it as evidence of ongoing maintenance. The feed also carries 48 validator errors, the other thing Maps checks at onboarding; the findings below name each fix.
How this agency maps to the standards
The scorecard is a data-quality lens, not a compliance determination. Its universal references describe good GTFS and useful rider information. Useful references here are GTFS Schedule Best Practices, GTFS-Realtime Best Practices, MobilityData grading scheme, Google Transit publication guidance, FTA National Transit Database GTFS requirement. Read the full standards crosswalk.
- Correctness 55 / 100
- GTFS Schedule best practices, checked by the MobilityData validator. MobilityData grading covers stop locations, route names, and colors. Google Transit requires a feed to pass validation for publication. FTA NTD readiness also checks that the published feed is valid.
- Freshness 85 / 100
- GTFS Schedule best practices call for a dataset that stays current. An expired calendar can remove service from Google Transit and other rider trip planners. FTA NTD readiness also checks that the published feed is current.
- Rider experience 45 / 100
- GTFS Best Practices for rider-facing fields. MobilityData grading covers stop names and headsigns.
- Realtime quality Not yet published
- GTFS-Realtime best practices: a stable URL, high uptime, and frequent updates.
Show your grade
Put a badge on your agency site or feed README. It updates after each completed scoring check and links back to this scorecard.
Prefer a shields.io style? Point a dynamic endpoint badge at the published badge.json.
Cite this record
This page updates on every check. The record below does not: it is the dated file this grade came from, published at https://gtfsscorecard.org/data/artifacts/burbankbus/2026-08-02.json and never overwritten, pinning the grade, category scores, rubric version, validator version, reader archive profile, and the scored feed's sha256 as they stood on 2026-08-02. Use it in a board packet, a regulatory filing, or a research citation instead of linking the live page, whose content will differ on your next visit.
Citing the tool itself rather than one agency's record? Use the repo's CITATION.cff.