Prep for a call: printable one-page brief · For your board packet: printable one-pager · Compare with another agency · Watch this feed: get an email before it expires · Correct or claim this listing
Feed status · checked 2026-07-10
Radford Transit
Based on the feed this agency publishes
First scorecard for this agency
Ahead of 25% of all tracked agencies and 27% of mid-size agencies.
A data-quality and completeness lens to help an agency improve its GTFS feed. Not an official compliance determination from any transit program. New to this? How to read your scorecard. Interactive view of this scorecard. Rubric v1.1, validator 8.0.1.
Top things to fix
Re-export with a validity window that reaches at least 60 days out.Likely your export tool
Service data runs out in 19 day(s). When the calendar runs out, trip planners stop showing this agency. Fixing it now is calmer than after riders notice.
⏱ One export setting.worth about +61 points
Set wheelchair_boarding to 1 (accessible) or 2 (not accessible) for every stop. A field survey can start with the busiest stops.Likely your team
142 of 142 stops don't say whether a wheelchair user can board there. Riders who use wheelchairs can't plan a trip when accessibility is marked 'unknown'; apps show no information at all.
⏱ A column in stops.txt; your scheduling software likely has it.worth about +25 points
Set wheelchair_accessible on every trip (most small-agency fleets are 100% accessible, so this is often a single default).Likely your export tool
431 of 431 trips don't say whether the vehicle is wheelchair accessible. Even with accessible stops, riders need to know the bus itself can take them.
⏱ Often one default setting in your export.worth about +15 points
This feed is generated by your Passio system from the route and stop data they maintain. Send the fix list to your Passio contact.
Close the loop on each fix. Read the guide, make the change in your tool, and let the next run verify it — the scorecard shows the fix; the agency publishes it.
Re-export with a validity window that reaches at least 60 days out. · Read the fix guide
Make the change. This feed is generated by your Passio system from the route and stop data they maintain. Send the fix list to your Passio contact.
Prove it cleared. The next scorecard run re-checks this automatically and, once it is gone, mints a dated receipt. Self-check a feed before you publish.
Set wheelchair_boarding to 1 (accessible) or 2 (not accessible) for every stop. A field survey can start with the busiest stops. · Read the fix guide
Make the change. This feed is generated by your Passio system from the route and stop data they maintain. Send the fix list to your Passio contact.
Prove it cleared. The next scorecard run re-checks this automatically and, once it is gone, mints a dated receipt. Self-check a feed before you publish.
Set wheelchair_accessible on every trip (most small-agency fleets are 100% accessible, so this is often a single default). · Read the fix guide
Make the change. This feed is generated by your Passio system from the route and stop data they maintain. Send the fix list to your Passio contact.
Prove it cleared. The next scorecard run re-checks this automatically and, once it is gone, mints a dated receipt. Self-check a feed before you publish.
Send Passio a fix request
This feed is generated by your Passio system. Copy this and send it to your Passio contact; the fixes apply to the route and stop data behind your AVL setup. Each fix names the validator notice and a guide link.
Send the agency a note
Supporting this agency? Copy this and email it to them. It names what lapsed, why it matters to riders, and the one setting to change.
Score by category
The MobilityData validator flagged 8 kinds of issue across 78 instances (0 error, 71 warning, 7 informational).
Service data runs out in 19 day(s). Publish an updated feed soon or riders will lose trip planning.
0% of stops state wheelchair accessibility (0% marked accessible, 0% marked not accessible). This measures what the feed publishes, not whether a stop is physically usable. Fare data is not published.
0% of stops state accessibility (0% marked accessible). Reflects what the feed states, not verified physical usability.
Not scored yet. Nothing here counts against the grade.
Over time
This is the first scorecard for this agency. A trend and a "what changed" summary appear here once it has been checked more than once.
Everything we checked
- Warning431 instances
431 of 431 trips don't say whether the vehicle is wheelchair accessible.
Even with accessible stops, riders need to know the bus itself can take them.
Fix: Set wheelchair_accessible on every trip (most small-agency fleets are 100% accessible, so this is often a single default). (Often one default setting in your export.)
Validator rule: scorecard_wheelchair_accessible_unknown · Read the fix guide · See GTFS Schedule reference (opens the GTFS Schedule reference on an external site)
- Warning431 instances
431 of 431 trips have no headsign.
Riders at the stop can't tell which direction a bus is going.
Fix: Populate trip_headsign to match what the bus displays. (Usually a bulk edit in your scheduling software.)
Validator rule: scorecard_missing_headsigns · Read the fix guide · See GTFS Best Practices (opens GTFS Best Practices on an external site)
- Warning142 instances
142 of 142 stops don't say whether a wheelchair user can board there.
Riders who use wheelchairs can't plan a trip when accessibility is marked 'unknown'; apps show no information at all.
Fix: Set wheelchair_boarding to 1 (accessible) or 2 (not accessible) for every stop. A field survey can start with the busiest stops. (A column in stops.txt; your scheduling software likely has it.)
Validator rule: scorecard_wheelchair_boarding_unknown · Read the fix guide · See GTFS Schedule reference (opens the GTFS Schedule reference on an external site)
- Warning53 instances
Some stops exist in the feed but no trip ever stops at them.
Riders may walk to a stop where no bus is scheduled to arrive.
Fix: Remove retired stops from the export, or add them back to the trips that should serve them. (A review pass in your scheduling software.)
Validator rule: stop_without_stop_time · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Warning12 instances
Stop too far from shape using user distance (flagged by the MobilityData validator).
See the linked rule for what this affects.
Fix: Review the rule documentation for 'stop_too_far_from_shape_using_user_distance' at https://gtfs-validator.mobilitydata.org/rules.html and check the flagged rows in your feed. (Varies.)
Validator rule: stop_too_far_from_shape_using_user_distance · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Warning2 instances
Stops match shape out of order (flagged by the MobilityData validator).
See the linked rule for what this affects.
Fix: Review the rule documentation for 'stops_match_shape_out_of_order' at https://gtfs-validator.mobilitydata.org/rules.html and check the flagged rows in your feed. (Varies.)
Validator rule: stops_match_shape_out_of_order · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Warning1 instance
Some service calendars in the feed have already expired.
Expired calendars are dead weight and can hide real schedule problems from your staff and vendors.
Fix: Remove past service periods the next time you export the feed. (One setting in most export tools.)
Validator rule: expired_calendar · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Warning1 instance
This feed's service calendar runs out within the next 30 days.
If a new feed isn't published before it ends, trip planners will drop your agency and riders will see no service.
Fix: Schedule a feed re-export now so the new calendar is live well before the current one ends. (Usually a re-export from your scheduling software.)
Validator rule: feed_expiration_date30_days · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Warning1 instance
Some rider-facing names are in ALL CAPS or all lowercase.
ALL-CAPS stop and headsign names are harder to read in apps and are read awkwardly by screen readers.
Fix: Use mixed case for stop names and headsigns (e.g. 'Main St & 2nd Ave', not 'MAIN ST & 2ND AVE'). (Often a bulk fix in your scheduling software.)
Validator rule: mixed_case_recommended_field · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Warning1 instance
Some stops sit far from the route line they belong to.
Trip planners may draw the bus route through the wrong streets or point riders to the wrong corner.
Fix: Check the flagged stops' coordinates and the route shape in your scheduling software; re-snap whichever is misplaced. (A few minutes per flagged stop.)
Validator rule: stop_too_far_from_shape · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Warning1 instance
Service data runs out in 19 day(s).
When the calendar runs out, trip planners stop showing this agency. Fixing it now is calmer than after riders notice.
Fix: Re-export with a validity window that reaches at least 60 days out. (One export setting.)
Validator rule: scorecard_feed_expiring_soon · Read the fix guide · See GTFS Best Practices (opens GTFS Best Practices on an external site)
- Warning1 instance
The feed contains no fare information.
Riders see 'fare unknown' in trip planners and can't budget their trip; visitors are most affected.
Fix: Add fare_attributes.txt (or Fares v2 files) with your fare structure. If your service is fare-free, ask to have it marked fare-free instead. (A small file for most flat-fare systems.)
Validator rule: scorecard_no_fare_data · Read the fix guide · See GTFS Best Practices (opens GTFS Best Practices on an external site)
- Info7 instances
Service window outside feed period (flagged by the MobilityData validator).
See the linked rule for what this affects.
Fix: Review the rule documentation for 'service_window_outside_feed_period' at https://gtfs-validator.mobilitydata.org/rules.html and check the flagged rows in your feed. (Varies.)
Validator rule: service_window_outside_feed_period · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
Beyond the grade
Opportunities that do not change your grade today: fare detail, on-demand service, and deeper accessibility data.
3 route badge(s) pair a color and text color below the WCAG 4.5:1 contrast bar (25, 35, 100).
Consider: Adjust route_color or route_text_color so each pair clears 4.5:1. Often switching the text between black and white is enough.
93 stop name(s) use abbreviations or symbols a screen reader may mispronounce, with no spoken form set ("2nd Ave/Lawrence St", "2nd St/Highland Ave", "3rd Ave/Downey St NB", and more).
Consider: Add tts_stop_name with the spoken form, e.g. 'Main Street and Second Avenue', for the affected stops.
Some fixes we can make for you
These are the safe mechanical fixes, applied to a copy of your feed. They change only what is certain and leave everything else untouched. Review the diff before you publish.
Recased shouting stop names 1 change
For example: CHBS -> Chbs
NTD GTFS readiness Needs attention
This feed is close to NTD-ready. Service data runs out in 19 days; renew before you certify.
- Published Ready
- Published at a public URL.
- Valid Ready
- Passes validation with no errors.
- Current Needs attention
- Service data runs out in 19 days; renew before you certify.
- agency_id matches your NTD ID Not checked yet
- Setting your GTFS agency_id to your five-digit NTD ID is an optional way to line a feed up with its National Transit Database record. FTA links the two on your P-50 form, so it is not a required feed change. We don't have your NTD ID on file, so this is not checked yet.
In plain words: if you report to the federal transit database, you have to publish a working, up-to-date feed and confirm it once a year. This box is a heads-up on whether yours looks ready; it is not the official sign-off.
A readiness signal mapping this feed to the FTA National Transit Database GTFS requirement (Report Year 2023 onward: a public, valid, current feed, certified annually on the D-10). Aligning agency_id with your NTD ID lets the feed line up with your NTD record; the July 2025 final rule links the two on the P-50 form rather than requiring that feed change, and requires shapes.txt in the published GTFS: Full Reporters from Report Year 2025, and Reduced, Rural, and Tribal Reporters from Report Year 2026. Not an official determination; your certification is the official check.
Conformance mark Not yet
This feed is close to the conformance mark. Service data runs out in 19 days; renew to qualify. States wheelchair access on 0% of stops and 0% of trips; the mark needs 90% of each.
- Valid Met
- Passes validation with no errors.
- Current Not yet
- Service data runs out in 19 days; renew to qualify.
- Accessible Not yet
- States wheelchair access on 0% of stops and 0% of trips; the mark needs 90% of each.
In plain words: earn this mark when your feed passes validation, has not expired, and says whether nearly every stop and trip is wheelchair accessible.
A pass credential for a feed that is valid, current, and states wheelchair access on nearly every stop and trip. Accessibility here measures what the feed publishes, not whether a stop is physically usable. How the conformance mark works.
Can riders use it?
Checks beyond structural validation: places where the feed is valid but a rider still could not travel.
- 53 of 142 boardable stops are never served by any trip. Riders see these stops in apps and on the map but can never catch anything there, which erodes trust in the data. Remove stops no route serves, or add the trips that should call at them.
These do not change the grade. They catch trips with no rideable leg and stops no trip serves, the kind of gap a trip planner trips over.
Clears the Google and Apple Maps four-week coverage bar. This feed has 539 days of service ahead, clearing the four-week (28-day) window Maps asks for. No validator errors either, so riders keep seeing this agency in their trip planners; warnings lower the grade here but do not remove a feed from Maps.
How this agency maps to the standards
A data-quality lens, not a compliance determination. Each category shows this feed's score and the standards it relates to: the FTA National Transit Database GTFS requirement, the MobilityData grading scheme, and the Google Transit gate. Read the full standards crosswalk.
- Correctness 65 / 100
- GTFS Schedule best practices, checked by the MobilityData validator. MobilityData grading: stop locations, route names and colors. Google Transit: a feed must pass validation to stay in Maps.
- Freshness 32 / 100
- The FTA National Transit Database expectation of a valid, current feed. Google Transit: an expired calendar drops the agency from Maps.
- Rider experience 30 / 100
- GTFS Best Practices for rider-facing fields. MobilityData grading: stop names and headsigns.
- Realtime quality Not yet published
- GTFS-Realtime best practices: a stable URL, high uptime, and frequent updates.
Show your grade
Put a live badge on your agency site or feed README. It updates daily and links back to this scorecard.
Prefer a shields.io style? Point a dynamic endpoint badge at the published badge.json.
Cite this record
This page updates on every check. The record below does not: it is the dated file this grade came from, published at https://gtfsscorecard.org/data/artifacts/radford-transit-380/2026-07-10.json and never overwritten, pinning the grade, category scores, rubric version, validator version, and the scored feed's sha256 as they stood on 2026-07-10. Use it in a board packet, an NTD narrative, or a research citation instead of linking the live page, whose content will differ on your next visit.
Citing the tool itself rather than one agency's record? Use the repo's CITATION.cff.