Réseau urbain et scolaire Lila Presqu'ile

Trip distance exceeds shape distance (flagged by the MobilityData validator).

See the linked rule for what this affects.

Fix: Review the rule documentation for 'trip_distance_exceeds_shape_distance' at https://gtfs-validator.mobilitydata.org/rules.html and check the flagged rows in your feed. (Varies.)

Validator rule: trip_distance_exceeds_shape_distance · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Some trips have stop times whose distances along the route go backwards.

Apps can show buses jumping backwards or mis-order stops.

Fix: Re-generate shape distances in your export; flag to your vendor if it persists. (Usually an export-tool fix, not hand editing.)

Validator rule: decreasing_or_equal_stop_time_distance · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

1943 of 1943 trips don't say whether the vehicle is wheelchair accessible.

Even with accessible stops, riders need to know the bus itself can take them.

Fix: Set wheelchair_accessible on every trip. If every vehicle is accessible, this may be one default; otherwise use the value for each trip. (A default or per-trip field in your export.)

Validator rule: scorecard_wheelchair_accessible_unknown · Read the fix guide · See GTFS Schedule reference (opens the GTFS Schedule reference on an external site)

1681 of 1897 stops don't say whether a wheelchair user can board there.

Riders who use wheelchairs can't plan a trip when accessibility is marked 'unknown'; apps show no information at all.

Fix: Set wheelchair_boarding to 1 (accessible) or 2 (not accessible) for every stop. A field survey can start with the busiest stops. (A column in stops.txt; your scheduling software likely has it.)

Validator rule: scorecard_wheelchair_boarding_unknown · Read the fix guide · See GTFS Schedule reference (opens the GTFS Schedule reference on an external site)

On some trips the stop distances run a little past the end of the route line.

The stop and shape distance values don't quite line up, so any math that uses them can drift.

Fix: Re-generate shape_dist_traveled on export so stop and shape distances use the same units. (Usually an export-tool fix, not hand editing.)

Validator rule: trip_distance_exceeds_shape_distance_below_threshold · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Some stops sit far from the route line, going by the feed's own distance values.

Trip planners may draw the route down the wrong streets or point riders to the wrong corner.

Fix: Check the flagged stops' shape_dist_traveled against the route shape, and re-generate it on export if they disagree. (Usually an export-tool fix, not hand editing.)

Validator rule: stop_too_far_from_shape_using_user_distance · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Equal shape distance diff coordinates distance below threshold (flagged by the MobilityData validator).

See the linked rule for what this affects.

Fix: Review the rule documentation for 'equal_shape_distance_diff_coordinates_distance_below_threshold' at https://gtfs-validator.mobilitydata.org/rules.html and check the flagged rows in your feed. (Varies.)

Validator rule: equal_shape_distance_diff_coordinates_distance_below_threshold · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

47 of 1943 trips have no headsign.

Riders at the stop can't tell which direction a bus is going.

Fix: Populate trip_headsign to match what the bus displays. (Usually a bulk edit in your scheduling software.)

Validator rule: scorecard_missing_headsigns · Read the fix guide · See GTFS Best Practices (opens GTFS Best Practices on an external site)

Inconsistent route type for block id (flagged by the MobilityData validator).

See the linked rule for what this affects.

Fix: Review the rule documentation for 'inconsistent_route_type_for_block_id' at https://gtfs-validator.mobilitydata.org/rules.html and check the flagged rows in your feed. (Varies.)

Validator rule: inconsistent_route_type_for_block_id · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Some rider-facing names are in ALL CAPS or all lowercase.

ALL-CAPS stop and headsign names are harder to read in apps and are read awkwardly by screen readers.

Fix: Use mixed case for stop names and headsigns (e.g. 'Main St & 2nd Ave', not 'MAIN ST & 2ND AVE'). (Often a bulk fix in your scheduling software.)

Validator rule: mixed_case_recommended_field · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

On some trips the stops fall along the route line in a different order than the schedule lists.

Trip planners can draw the bus doubling back or skipping ahead, which confuses riders reading the map.

Fix: Check the stop order and the shape direction in your scheduling software; the shape is often drawn backwards. (A few minutes per flagged trip.)

Validator rule: stops_match_shape_out_of_order · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Unexpected enum value (flagged by the MobilityData validator).

See the linked rule for what this affects.

Fix: Review the rule documentation for 'unexpected_enum_value' at https://gtfs-validator.mobilitydata.org/rules.html and check the flagged rows in your feed. (Varies.)

Validator rule: unexpected_enum_value · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

This feed models stations or entrances but has no pathways.txt.

Trip planners can't guide riders through the station, and there is no step-free route information for wheelchair users.

Fix: Add pathways.txt connecting entrances, platforms, and any elevators, with a level for each. (Worth it for multi-level or large stations; flat stops don't need it.)

Validator rule: scorecard_station_no_pathways · Read the fix guide · See GTFS Schedule reference (opens the GTFS Schedule reference on an external site)

The feed has a stretch of two weeks or more with no service running.

A long gap can mean dates were left out of the calendar. Apps then show no trips on those days.

Fix: Check whether the gap is real, like a seasonal break; if not, add the missing dates to the calendar. (A review of your calendar dates.)

Validator rule: big_gap_in_service · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)