Feed status · checked 2026-09-01
Réseau urbain agglo'Bus
Based on the official feed source on file
Service mode Bus
First scorecard for this agency
Catalogued in Nouvelle-Aquitaine, France.
A data-quality and completeness lens to help an agency improve its GTFS feed. Not an official compliance determination from any transit program. New to this? How to read your scorecard. Interactive view of this scorecard. Rubric v1.3, validator 8.0.1.
Checked for changes 1 hours ago; last changed 1 hours ago.
Measured 3 of 4 score categories from the official feed URL on file.
How we measured this
Confidence in this measurement: medium.
- Realtime quality was not measured this run. It does not count against the grade.
- The feed was downloaded from the official feed URL on file.
Confidence describes how much the pipeline could measure this run, not the feed itself. It never changes the grade.
Top things to fix
Set wheelchair_accessible on every trip. If every vehicle is accessible, this may be one default; otherwise use the value for each trip.Likely your export tool
117 of 117 trips don't say whether the vehicle is wheelchair accessible. Even with accessible stops, riders need to know the bus itself can take them.
⏱ A default or per-trip field in your export.worth about +15 points in its category
Add the destination, direction, or 'via' label riders actually see to trip_headsign. Do not copy the route name. If the label changes during the trip, use stop_headsign.
117 of 117 trips have no headsign, the text that tells riders where the bus is going. When a route has multiple directions or patterns, the route name alone may not tell riders which service is coming.
⏱ Usually one value per route pattern in your scheduling source.worth about +15 points in its category
Delete the empty calendars or set their service days.Likely your export tool
Some service calendars have no days of the week switched on. Trips tied to these calendars never run; they are dead data that can mask real schedule problems.
⏱ A few minutes in your scheduling software.worth about +4 points in its category
Finding handoff
Move one finding to a recheck
Select one finding. Copy the request, make the change in the feed-producing tool, then compare the next complete run.
- Feed evidence
- 117 of 117 trips don't say whether the vehicle is wheelchair accessible.
- Next action
- Set wheelchair_accessible on every trip. If every vehicle is accessible, this may be one default; otherwise use the value for each trip.
- Recheck
- Publish the changed feed at the same URL. On the next complete, comparable scorecard run, confirm that this finding is no longer reported.
Copy handoff text
- Feed evidence
- 117 of 117 trips have no headsign, the text that tells riders where the bus is going.
- Next action
- Add the destination, direction, or 'via' label riders actually see to trip_headsign. Do not copy the route name. If the label changes during the trip, use stop_headsign.
- Recheck
- Publish the changed feed at the same URL. On the next complete, comparable scorecard run, confirm that this finding is no longer reported.
Copy handoff text
- Feed evidence
- Some service calendars have no days of the week switched on.
- Next action
- Delete the empty calendars or set their service days.
- Recheck
- Publish the changed feed at the same URL. On the next complete, comparable scorecard run, confirm that this finding is no longer reported.
Copy handoff text
How to make and check these changes
Check the result on the published feed. Read the guide, make the change in your tool, and use the next comparable run to see whether the finding is still reported. Only an action or ticket record can attribute who made the change.
Set wheelchair_accessible on every trip. If every vehicle is accessible, this may be one default; otherwise use the value for each trip. · Read the fix guide
Make the change. Make this change in whatever tool produces your feed, then re-export.
Check the result. The next scorecard run checks this finding again. If a comparable check no longer reports it, the feed's clearance log records that result. This confirms feed state, not who made the change. Self-check a feed before you publish.
Add the destination, direction, or 'via' label riders actually see to trip_headsign. Do not copy the route name. If the label changes during the trip, use stop_headsign. · Read the fix guide
Make the change. Make this change in whatever tool produces your feed, then re-export.
Check the result. The next scorecard run checks this finding again. If a comparable check no longer reports it, the feed's clearance log records that result. This confirms feed state, not who made the change. Self-check a feed before you publish.
Delete the empty calendars or set their service days. · Read the fix guide
Make the change. Make this change in whatever tool produces your feed, then re-export.
Check the result. The next scorecard run checks this finding again. If a comparable check no longer reports it, the feed's clearance log records that result. This confirms feed state, not who made the change. Self-check a feed before you publish.
Rider view: what this feed publishes
A quick read of rider-facing information in this feed.
- Schedule visibility
- The feed's last published service date is in 364 days.
- Published accessibility data
- Accessibility information is stated for 100% of stops and 0% of trips. This measures published data, not whether stops or vehicles are physically usable.
- Fare information
- Fare information is published using GTFS Fares v1.
- Realtime information
- Realtime-feed availability and live-arrival coverage are not known from this scorecard.
Important: This does not rate service reliability. Riders should confirm current service alerts, fares, and accessibility accommodations with the transit operator before traveling.
Send your vendor a fix request
You may not control the GTFS export yourself. Copy this and send it to whoever runs your scheduling software export. It names each fix with the validator notice and a guide link.
Score by category
The MobilityData validator flagged 2 kinds of issue across 10 instances (0 error, 1 warning, 9 informational).
Service data covers the next 364 days.
100% of stops state wheelchair accessibility (62% marked accessible, 38% marked not accessible). This measures what the feed publishes, not whether a stop is physically usable. Fare data is published.
100% of stops state accessibility (62% marked accessible). Reflects what the feed states, not verified physical usability.
1 accessibility depth signal
3 route badge(s) pair a color and text color below the WCAG 4.5:1 contrast bar (L2, L3, L5).
Consider: Adjust route_color or route_text_color so each pair clears 4.5:1. Often switching the text between black and white is enough.
Opportunities to strengthen the data, not deductions from the sub-score above. States what the second accessibility lens can check from the feed, not verified physical usability.
Fares are applied to trips.
Not scored yet. Nothing here counts against the grade.
Routes and stops
Each route is drawn once, using the longest shape its trips follow; stops are the dots.
This feed has 69 stops.
The route and stop data is ready below. Load the map only when you want the geographic view. It uses additional data.
Basemap: OpenFreeMap, © OpenStreetMap contributors. Routes and stops: this agency's GTFS feed.
- L1 (yellow)
- L2 (teal)
- L3 (pink)
- L4 (blue)
- L5 (red)
- L6 (brown)
- L7 (purple)
- L8 (yellow)
| Route | Type | Line color |
|---|---|---|
| L1 Ligne 1 | Bus | yellow |
| L2 Ligne 2 | Bus | teal |
| L3 Ligne 3 | Bus | pink |
| L4 Ligne 4 | Bus | blue |
| L5 Ligne 5 | Bus | red |
| L6 Ligne 6 | Bus | brown |
| L7 Ligne 7 | Bus | purple |
| L8 Ligne 8 | Bus | yellow |
List every stop
- Allendé
- Allendé
- Beauregard
- Bellevue
- Berry
- Place Bonnyaud
- Lycée Bourdan
- Lycée Bourdan
- Brésard
- Brésard
- Carnot
- René Cassin
- Docteur Chantrelle
- Charsat
- Charles de Gaulle
- Clinique de la Marche
- Courtille
- Croizat
- Saint Exupéry
- Lycée Favard
- Fayolle
- Fayolle
- Gambetta
- Gambetta
- Ecole de la Garde
- Gare SNCF
- Gare SNCF
- Professeur Grancher
- Professeur Grancher
- Guillaumin
- Guillon
- Hôpital
- Hôpital
- Hôtel de Ville
- Hôtel de Ville
- Eugène Jamot Braconne
- Jean Moulin
- Jouhet
- Labetoulle
- Ecole Langevin
- Louis Laroche
- Avenue de Laure
- Limousin
- Limousin
- Maindigour
- Maindigour
- Petit Malleret
- Place du Marché
- Marc Bloch
- Collège Marouzeau
- Collège Marouzeau
- Mendès France
- Montplaisir
- Montplaisir
- Collège Nadaud
- Picasso
- Picasso
- Poitou
- Ecole Prévert
- Ecole Prévert
- Anna Quinquaud
- Rhin Danube
- Ribière
- Schoelcher
- Schoelcher
- Sylvain Blanchet
- Tabarly
- Place du Tilleul
- Le Verger
Over time
This is the first scorecard for this agency. A trend and a "what changed" summary appear here once it has been checked more than once.
Everything we checked
4 findings, ordered by severity.
Show every finding
- Warning117 instances
117 of 117 trips don't say whether the vehicle is wheelchair accessible.
Even with accessible stops, riders need to know the bus itself can take them.
Fix: Set wheelchair_accessible on every trip. If every vehicle is accessible, this may be one default; otherwise use the value for each trip. (A default or per-trip field in your export.)
Finding code: scorecard_wheelchair_accessible_unknown · Read the fix guide · See GTFS Schedule reference (opens the GTFS Schedule reference on an external site)
- Warning117 instances
117 of 117 trips have no headsign, the text that tells riders where the bus is going.
When a route has multiple directions or patterns, the route name alone may not tell riders which service is coming.
Fix: Add the destination, direction, or 'via' label riders actually see to trip_headsign. Do not copy the route name. If the label changes during the trip, use stop_headsign. (Usually one value per route pattern in your scheduling source.)
Finding code: scorecard_missing_headsigns · Read the fix guide · See GTFS Best Practices (opens GTFS Best Practices on an external site)
- Warning1 instance
Some service calendars have no days of the week switched on.
Trips tied to these calendars never run; they are dead data that can mask real schedule problems.
Fix: Delete the empty calendars or set their service days. (A few minutes in your scheduling software.)
Finding code: service_has_no_active_day_of_the_week · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Info9 instances
The feed has a stretch of two weeks or more with no service running.
A long gap can mean dates were left out of the calendar. Apps then show no trips on those days.
Fix: Check whether the gap is real, like a seasonal break; if not, add the missing dates to the calendar. (A review of your calendar dates.)
Finding code: big_gap_in_service · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
Conformance mark Not yet
One requirement remains for this feed to earn the conformance mark. States wheelchair access on 100% of stops and 0% of trips; the mark needs 90% of each.
- Valid Met
- Passes validation with no errors.
- Current Met
- Service data covers the next 364 days.
- Accessible Not yet
- States wheelchair access on 100% of stops and 0% of trips; the mark needs 90% of each.
In plain words: earn this mark when your feed passes validation, has not expired, and says whether nearly every stop and trip is wheelchair accessible.
A pass credential for a feed that is valid, current, and states wheelchair access on nearly every stop and trip. Accessibility here measures what the feed publishes, not whether a stop is physically usable. How the conformance mark works.
Clears the Google and Apple Maps four-week coverage bar. This feed has 364 days of service ahead, clearing the four-week (28-day) window Maps asks for. No validator errors either, so riders keep seeing this agency in their trip planners; warnings lower the grade here but do not remove a feed from Maps.
How this agency maps to the standards
The scorecard is a data-quality lens, not a compliance determination. Its universal references describe good GTFS and useful rider information. Useful references here are GTFS Schedule Best Practices, GTFS-Realtime Best Practices, MobilityData grading scheme, Google Transit publication guidance. Read the full standards crosswalk.
- Correctness 95 / 100
- GTFS Schedule best practices, checked by the MobilityData validator. MobilityData grading covers stop locations, route names, and colors. Google Transit requires a feed to pass validation for publication.
- Freshness 100 / 100
- GTFS Schedule best practices call for a dataset that stays current. An expired calendar can remove service from Google Transit and other rider trip planners.
- Rider experience 70 / 100
- GTFS Best Practices for rider-facing fields. MobilityData grading covers stop names and headsigns.
- Realtime quality Not yet published
- GTFS-Realtime best practices: a stable URL, high uptime, and frequent updates.
Show your grade
Put a badge on your agency site or feed README. It updates after each completed scoring check and links back to this scorecard.
Prefer a shields.io style? Point a dynamic endpoint badge at the published badge.json.
Cite this record
This page updates on every check. The record below does not: it is the dated file this grade came from, published at https://gtfsscorecard.org/data/artifacts/fr-pan-79483/2026-09-01.json and never overwritten, pinning the grade, category scores, rubric version, validator version, reader archive profile, and the scored feed's sha256 as they stood on 2026-09-01. Use it in a board packet, a regulatory filing, or a research citation instead of linking the live page, whose content will differ on your next visit.
Citing the tool itself rather than one agency's record? Use the repo's CITATION.cff.