Feed status · checked 2026-09-05
EtxebarriBus
Based on the official feed source on file
Service mode Bus
First scorecard for this agency
Catalogued in Bizkaia, Spain.
A data-quality and completeness lens to help an agency improve its GTFS feed. Not an official compliance determination from any transit program. New to this? How to read your scorecard. Interactive view of this scorecard. Rubric v1.3, validator 8.0.1.
Measured 3 of 4 score categories from the official feed URL on file.
How we measured this
Confidence in this measurement: medium.
- Realtime quality was not measured this run. It does not count against the grade.
- The feed was downloaded from the official feed URL on file.
Confidence describes how much the pipeline could measure this run, not the feed itself. It never changes the grade.
Top things to fix
Set wheelchair_boarding to 1 (accessible) or 2 (not accessible) for every stop. A field survey can start with the busiest stops.Likely your team
24 of 24 stops don't say whether a wheelchair user can board there. Riders who use wheelchairs can't plan a trip when accessibility is marked 'unknown'; apps show no information at all.
⏱ A column in stops.txt; your scheduling software likely has it.worth about +25 points in its category
Set wheelchair_accessible on every trip. If every vehicle is accessible, this may be one default; otherwise use the value for each trip.Likely your export tool
199 of 199 trips don't say whether the vehicle is wheelchair accessible. Even with accessible stops, riders need to know the bus itself can take them.
⏱ A default or per-trip field in your export.worth about +15 points in its category
Check the flagged stops' shape_dist_traveled against the route shape, and re-generate it on export if they disagree.Likely your export tool
Some stops sit far from the route line, going by the feed's own distance values. Trip planners may draw the route down the wrong streets or point riders to the wrong corner.
⏱ Usually an export-tool fix, not hand editing.worth about +6 points in its category
Finding handoff
Move one finding to a recheck
Select one finding. Copy the request, make the change in the feed-producing tool, then compare the next complete run.
- Feed evidence
- 24 of 24 stops don't say whether a wheelchair user can board there.
- Next action
- Set wheelchair_boarding to 1 (accessible) or 2 (not accessible) for every stop. A field survey can start with the busiest stops.
- Recheck
- Publish the changed feed at the same URL. On the next complete, comparable scorecard run, confirm that this finding is no longer reported.
Copy handoff text
- Feed evidence
- 199 of 199 trips don't say whether the vehicle is wheelchair accessible.
- Next action
- Set wheelchair_accessible on every trip. If every vehicle is accessible, this may be one default; otherwise use the value for each trip.
- Recheck
- Publish the changed feed at the same URL. On the next complete, comparable scorecard run, confirm that this finding is no longer reported.
Copy handoff text
- Feed evidence
- Some stops sit far from the route line, going by the feed's own distance values.
- Next action
- Check the flagged stops' shape_dist_traveled against the route shape, and re-generate it on export if they disagree.
- Recheck
- Publish the changed feed at the same URL. On the next complete, comparable scorecard run, confirm that this finding is no longer reported.
Copy handoff text
How to make and check these changes
Check the result on the published feed. Read the guide, make the change in your tool, and use the next comparable run to see whether the finding is still reported. Only an action or ticket record can attribute who made the change.
Set wheelchair_boarding to 1 (accessible) or 2 (not accessible) for every stop. A field survey can start with the busiest stops. · Read the fix guide
Make the change. Make this change in whatever tool produces your feed, then re-export.
Check the result. The next scorecard run checks this finding again. If a comparable check no longer reports it, the feed's clearance log records that result. This confirms feed state, not who made the change. Self-check a feed before you publish.
Set wheelchair_accessible on every trip. If every vehicle is accessible, this may be one default; otherwise use the value for each trip. · Read the fix guide
Make the change. Make this change in whatever tool produces your feed, then re-export.
Check the result. The next scorecard run checks this finding again. If a comparable check no longer reports it, the feed's clearance log records that result. This confirms feed state, not who made the change. Self-check a feed before you publish.
Check the flagged stops' shape_dist_traveled against the route shape, and re-generate it on export if they disagree. · Read the fix guide
Make the change. Make this change in whatever tool produces your feed, then re-export.
Check the result. The next scorecard run checks this finding again. If a comparable check no longer reports it, the feed's clearance log records that result. This confirms feed state, not who made the change. Self-check a feed before you publish.
Rider view: what this feed publishes
A quick read of rider-facing information in this feed.
- Schedule visibility
- The feed's last published service date is in 117 days.
- Published accessibility data
- Accessibility information is stated for 0% of stops and 0% of trips. This measures published data, not whether stops or vehicles are physically usable.
- Fare information
- Fare information is published using GTFS Fares v1.
- Realtime information
- Realtime-feed availability and live-arrival coverage are not known from this scorecard.
Important: This does not rate service reliability. Riders should confirm current service alerts, fares, and accessibility accommodations with the transit operator before traveling.
Send your vendor a fix request
You may not control the GTFS export yourself. Copy this and send it to whoever runs your scheduling software export. It names each fix with the validator notice and a guide link.
Score by category
The MobilityData validator flagged 5 kinds of issue across 193 instances (0 error, 14 warning, 179 informational).
Service data covers the next 117 days.
0% of stops state wheelchair accessibility (0% marked accessible, 0% marked not accessible). This measures what the feed publishes, not whether a stop is physically usable. Fare data is published.
0% of stops state accessibility (0% marked accessible). Reflects what the feed states, not verified physical usability.
2 accessibility depth signals
2 route badge(s) pair a color and text color below the WCAG 4.5:1 contrast bar (L1, L2R).
Consider: Adjust route_color or route_text_color so each pair clears 4.5:1. Often switching the text between black and white is enough.
5 stop name(s) use abbreviations or symbols a screen reader may mispronounce, with no spoken form set ("Av. San Antonio (Sentido metro)", "Av. San Antonio (Sentido Santa Marina)", "Av. San Antonio - Iglesia San Esteban", and more).
Consider: Add tts_stop_name with the spoken form, e.g. 'Main Street and Second Avenue', for the affected stops.
Opportunities to strengthen the data, not deductions from the sub-score above. States what the second accessibility lens can check from the feed, not verified physical usability.
Fares are applied to trips.
Not scored yet. Nothing here counts against the grade.
Routes and stops
Each route is drawn once, using the longest shape its trips follow; stops are the dots.
This feed has 24 stops.
The route and stop data is ready below. Load the map only when you want the geographic view. It uses additional data.
Basemap: OpenFreeMap, © OpenStreetMap contributors. Routes and stops: this agency's GTFS feed.
- L1 (gray)
- L2R (blue)
| Route | Type | Line color |
|---|---|---|
| L1 Linea 1 Santa Marina-Metro | Bus | gray |
| L2R Linea 2 | Bus | blue |
List every stop
- Av. San Antonio (Sentido Santa Marina)
- Av. San Antonio (Sentido metro)
- Av. San Antonio - Iglesia San Esteban
- Av. San Antonio 43 - Polideportivo
- Av. San Antonio 56
- Bokete
- Fuenlabrada
- Fuenlabrada - Ulibarri Parkea (Sentido metro)
- Galicia
- Galicia 24
- Lezama Legizamon (Sentido Bokete)
- Lezama Legizamon (Sentido metro)
- Lezama Legizamon - Ascensor (Sentido metro)
- Lezama Legizamon 14
- Marivi Iturbe (Sentido Santa Marina)
- Marivi Iturbe (Sentido metro)
- Metacal 1
- Metacal 4
- Metro Etxebarri
- Nerbioi - Molino Zubiondo
- San Esteban (Sentido Metro)
- Santa Marina - Instituto
- Santa Marina - Rotonda
- Zuberoa
Over time
This is the first scorecard for this agency. A trend and a "what changed" summary appear here once it has been checked more than once.
Everything we checked
7 findings, ordered by severity.
Show every finding
- Warning199 instances
199 of 199 trips don't say whether the vehicle is wheelchair accessible.
Even with accessible stops, riders need to know the bus itself can take them.
Fix: Set wheelchair_accessible on every trip. If every vehicle is accessible, this may be one default; otherwise use the value for each trip. (A default or per-trip field in your export.)
Finding code: scorecard_wheelchair_accessible_unknown · Read the fix guide · See GTFS Schedule reference (opens the GTFS Schedule reference on an external site)
- Warning24 instances
24 of 24 stops don't say whether a wheelchair user can board there.
Riders who use wheelchairs can't plan a trip when accessibility is marked 'unknown'; apps show no information at all.
Fix: Set wheelchair_boarding to 1 (accessible) or 2 (not accessible) for every stop. A field survey can start with the busiest stops. (A column in stops.txt; your scheduling software likely has it.)
Finding code: scorecard_wheelchair_boarding_unknown · Read the fix guide · See GTFS Schedule reference (opens the GTFS Schedule reference on an external site)
- Warning12 instances
Some stops sit far from the route line, going by the feed's own distance values.
Trip planners may draw the route down the wrong streets or point riders to the wrong corner.
Fix: Check the flagged stops' shape_dist_traveled against the route shape, and re-generate it on export if they disagree. (Usually an export-tool fix, not hand editing.)
Finding code: stop_too_far_from_shape_using_user_distance · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Warning2 instances
Some service calendars in the feed have already ended.
Expired calendars are dead weight and can hide real schedule problems from your staff and vendors.
Fix: Remove past service periods the next time you export the feed. (One setting in most export tools.)
Finding code: expired_calendar · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Info177 instances
Unsorted stop times (flagged by the MobilityData validator).
See the linked rule for what this affects.
Fix: Review the rule documentation for 'unsorted_stop_times' at https://gtfs-validator.mobilitydata.org/rules.html and check the flagged rows in your feed. (Varies.)
Finding code: unsorted_stop_times · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Info1 instance
The feed has a stretch of two weeks or more with no service running.
A long gap can mean dates were left out of the calendar. Apps then show no trips on those days.
Fix: Check whether the gap is real, like a seasonal break; if not, add the missing dates to the calendar. (A review of your calendar dates.)
Finding code: big_gap_in_service · Read the fix guide · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
- Info1 instance
Feed valid beyond total service window (flagged by the MobilityData validator).
See the linked rule for what this affects.
Fix: Review the rule documentation for 'feed_valid_beyond_total_service_window' at https://gtfs-validator.mobilitydata.org/rules.html and check the flagged rows in your feed. (Varies.)
Finding code: feed_valid_beyond_total_service_window · See MobilityData GTFS Validator rules (opens the validator rules on an external site)
Conformance mark Not yet
One requirement remains for this feed to earn the conformance mark. States wheelchair access on 0% of stops and 0% of trips; the mark needs 90% of each.
- Valid Met
- Passes validation with no errors.
- Current Met
- Service data covers the next 117 days.
- Accessible Not yet
- States wheelchair access on 0% of stops and 0% of trips; the mark needs 90% of each.
In plain words: earn this mark when your feed passes validation, has not expired, and says whether nearly every stop and trip is wheelchair accessible.
A pass credential for a feed that is valid, current, and states wheelchair access on nearly every stop and trip. Accessibility here measures what the feed publishes, not whether a stop is physically usable. How the conformance mark works.
Clears the Google and Apple Maps four-week coverage bar. This feed has 117 days of service ahead, clearing the four-week (28-day) window Maps asks for. No validator errors either, so riders keep seeing this agency in their trip planners; warnings lower the grade here but do not remove a feed from Maps.
How this agency maps to the standards
The scorecard is a data-quality lens, not a compliance determination. Its universal references describe good GTFS and useful rider information. Useful references here are GTFS Schedule Best Practices, GTFS-Realtime Best Practices, MobilityData grading scheme, Google Transit publication guidance. Read the full standards crosswalk.
- Correctness 88 / 100
- GTFS Schedule best practices, checked by the MobilityData validator. MobilityData grading covers stop locations, route names, and colors. Google Transit requires a feed to pass validation for publication.
- Freshness 100 / 100
- GTFS Schedule best practices call for a dataset that stays current. An expired calendar can remove service from Google Transit and other rider trip planners.
- Rider experience 60 / 100
- GTFS Best Practices for rider-facing fields. MobilityData grading covers stop names and headsigns.
- Realtime quality Not yet published
- GTFS-Realtime best practices: a stable URL, high uptime, and frequent updates.
Show your grade
Put a badge on your agency site or feed README. It updates after each completed scoring check and links back to this scorecard.
Prefer a shields.io style? Point a dynamic endpoint badge at the published badge.json.
Cite this record
This page updates on every check. The record below does not: it is the dated file this grade came from, published at https://gtfsscorecard.org/data/artifacts/etxebarribus/2026-09-05.json and never overwritten, pinning the grade, category scores, rubric version, validator version, reader archive profile, and the scored feed's sha256 as they stood on 2026-09-05. Use it in a board packet, a regulatory filing, or a research citation instead of linking the live page, whose content will differ on your next visit.
Citing the tool itself rather than one agency's record? Use the repo's CITATION.cff.