Carris Metropolitana

Trip distance exceeds shape distance (flagged by the MobilityData validator).

See the linked rule for what this affects.

Fix: Review the rule documentation for 'trip_distance_exceeds_shape_distance' at https://gtfs-validator.mobilitydata.org/rules.html and check the flagged rows in your feed. (Varies.)

Finding code: trip_distance_exceeds_shape_distance · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Block trips with overlapping stop times (flagged by the MobilityData validator).

See the linked rule for what this affects.

Fix: Review the rule documentation for 'block_trips_with_overlapping_stop_times' at https://gtfs-validator.mobilitydata.org/rules.html and check the flagged rows in your feed. (Varies.)

Finding code: block_trips_with_overlapping_stop_times · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Some trips have stop times whose distances along the route go backwards.

Apps can show buses jumping backwards or mis-order stops.

Fix: Re-generate shape distances in your export; flag to your vendor if it persists. (Usually an export-tool fix, not hand editing.)

Finding code: decreasing_or_equal_stop_time_distance · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

447229 of 447229 trips don't say whether the vehicle is wheelchair accessible.

Even with accessible stops, riders need to know the bus itself can take them.

Fix: Set wheelchair_accessible on every trip. If every vehicle is accessible, this may be one default; otherwise use the value for each trip. (A default or per-trip field in your export.)

Finding code: scorecard_wheelchair_accessible_unknown · Read the fix guide for scorecard_wheelchair_accessible_unknown · See GTFS Schedule reference (opens the GTFS Schedule reference on an external site)

On some trips the stop distances run a little past the end of the route line.

The stop and shape distance values don't quite line up, so any math that uses them can drift.

Fix: Re-generate shape_dist_traveled on export so stop and shape distances use the same units. (Usually an export-tool fix, not hand editing.)

Finding code: trip_distance_exceeds_shape_distance_below_threshold · Read the fix guide for trip_distance_exceeds_shape_distance_below_threshold · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Some stops sit far from the route line, going by the feed's own distance values.

Trip planners may draw the route down the wrong streets or point riders to the wrong corner.

Fix: Check the flagged stops' shape_dist_traveled against the route shape, and re-generate it on export if they disagree. (Usually an export-tool fix, not hand editing.)

Finding code: stop_too_far_from_shape_using_user_distance · Read the fix guide for stop_too_far_from_shape_using_user_distance · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

12774 of 12774 stops don't say whether a wheelchair user can board there.

Riders who use wheelchairs can't plan a trip when accessibility is marked 'unknown'; apps show no information at all.

Fix: Set wheelchair_boarding to 1 (accessible) or 2 (not accessible) for every stop. A field survey can start with the busiest stops. (A column in stops.txt; your scheduling software likely has it.)

Finding code: scorecard_wheelchair_boarding_unknown · Read the fix guide for scorecard_wheelchair_boarding_unknown · See GTFS Schedule reference (opens the GTFS Schedule reference on an external site)

Some rider-facing names are in ALL CAPS or all lowercase.

ALL-CAPS stop and headsign names are harder to read in apps and are read awkwardly by screen readers.

Fix: Use mixed case for stop names and headsigns (e.g. 'Main St & 2nd Ave', not 'MAIN ST & 2ND AVE'). (Often a bulk fix in your scheduling software.)

Finding code: mixed_case_recommended_field · Read the fix guide for mixed_case_recommended_field · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Some scheduled trips move faster between stops than a bus can.

Usually a typo'd stop time; riders get arrival times no bus can meet.

Fix: Check the flagged stop times for transposed minutes. (A few minutes per flagged trip.)

Finding code: fast_travel_between_consecutive_stops · Read the fix guide for fast_travel_between_consecutive_stops · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Between two distant stops, the times imply a speed no bus reaches.

A rider gets a trip plan that cannot happen. Live systems then report delays that are not real.

Fix: Check the two stop times for a wrong digit first. Then check whether a stop sits at the wrong coordinates, or a stop between them is missing. (Minutes per flagged trip once you open it.)

Finding code: fast_travel_between_far_stops · Read the fix guide for fast_travel_between_far_stops · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Some stops exist in the feed but no trip ever stops at them.

Riders may walk to a stop where no bus is scheduled to arrive.

Fix: Remove retired stops from the export, or add them back to the trips that should serve them. (A review pass in your scheduling software.)

Finding code: stop_without_stop_time · Read the fix guide for stop_without_stop_time · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Stop has too many matches for shape (flagged by the MobilityData validator).

See the linked rule for what this affects.

Fix: Review the rule documentation for 'stop_has_too_many_matches_for_shape' at https://gtfs-validator.mobilitydata.org/rules.html and check the flagged rows in your feed. (Varies.)

Finding code: stop_has_too_many_matches_for_shape · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Some route colors don't contrast with their text color.

Route badges get hard to read, most of all for riders with low vision.

Fix: Pick a darker/lighter route_text_color for the flagged routes. (One field per route.)

Finding code: route_color_contrast · Read the fix guide for route_color_contrast · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Some stops sit far from the route line they belong to.

Trip planners may draw the bus route through the wrong streets or point riders to the wrong corner.

Fix: Check the flagged stops' coordinates and the route shape in your scheduling software; re-snap whichever is misplaced. (A few minutes per flagged stop.)

Finding code: stop_too_far_from_shape · Read the fix guide for stop_too_far_from_shape · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Two or more routes share the same name.

Riders can't tell the routes apart in apps.

Fix: Give each route a distinct short or long name. (One field per route.)

Finding code: duplicate_route_name · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Some values have extra spaces at the start or end.

A stray space can break a match, so a stop or route may fail to link across files.

Fix: Trim leading and trailing spaces on export. The scorecard's auto-fixed copy already does this. (Usually one export setting.)

Finding code: leading_or_trailing_whitespaces · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

The feed contains no fare information.

Riders see 'fare unknown' in trip planners and can't budget their trip; visitors are most affected.

Fix: Add fare_attributes.txt (or Fares v2 files) with your fare structure. If your service is fare-free, ask to have it marked fare-free instead. (A small file for most flat-fare systems.)

Finding code: scorecard_no_fare_data · Read the fix guide for scorecard_no_fare_data · See GTFS Best Practices (opens GTFS Best Practices on an external site)

About 3538 stop names are written in ALL CAPS.

Mixed-case names are easier to read in apps and are read more naturally by screen readers.

Fix: Rename stops to mixed case where the language has letter case (for example, 'Central Station'). (Often a bulk fix in your scheduling software.)

Finding code: scorecard_stop_names_all_caps · Read the fix guide for scorecard_stop_names_all_caps · See GTFS Best Practices (opens GTFS Best Practices on an external site)

Some service dates fall outside the date window set in feed_info.txt.

feed_info.txt should span every day your service runs, so apps know when the data applies.

Fix: Widen feed_start_date and feed_end_date to cover all service dates, or fix the dates that fall outside. (Two fields in feed_info.txt, or one export setting.)

Finding code: service_window_outside_feed_period · Read the fix guide for service_window_outside_feed_period · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

Some files contain columns that are not part of the GTFS spec.

Harmless to riders, but apps ignore these columns and they can hide typos in real column names.

Fix: Check the flagged column names for misspellings of standard GTFS fields; remove them if they are vendor extras. (A quick look at the flagged files.)

Finding code: unknown_column · Read the fix guide for unknown_column · See MobilityData GTFS Validator rules (opens the validator rules on an external site)

The feed includes a file that is not part of the GTFS spec.

Apps ignore files they don't know, and a stray file can hide a misspelled standard file name.

Fix: Check the flagged file name for a typo of a standard GTFS file. Remove it if it is a vendor extra. (A quick look at the flagged file.)

Finding code: unknown_file · Read the fix guide for unknown_file · See MobilityData GTFS Validator rules (opens the validator rules on an external site)